Advertisement
Quick Links
Advertisement
Summary of Contents for Venz R9052
- Page 1 Quick Guide R9052 Smart Floodlight Camera Version: 1.0...
-
Page 2: Product Appearance
Product Appearance Indicator Light Power Switch Infrared Light Light Sensor Lens Floodlight PIR Detection Microphone Power Switch Hold and press the power switch for 3 seconds to turn on/off the device. Light Sensor Used to collec t ambient brightness values, when the illumination is lower than 2Lux, light will be on for night vision. - Page 3 Reset SD Card Charging Indicator Micro SD USB Interface Reset DC 5V Speaker SD Card Install SD card to support local video recording. Support FAT32 format and Max. 128G capacity. (SD card is not included.) USB Interface Charge device battery through the USB interface. Reset Hold and press the reset button for 5 seconds to reset the device.
- Page 4 2. Launch the app "WOOX Security". 3. Create a new account or log in to your existing account. 4. Tap “+” to add the device. 5. Select the applicable product type from the list of products.
- Page 5 6. Ensure the red indicator light is quick flashing (flashing 2 times per second). If the indicator light isn't flashing: hold and press the reset button on the bottom of camera until the indicator light starts to flash. 7. Confirm the Wi-Fi network and password. Note: only 2.4GHz Wi-Fi is supported.
- Page 6 8. The App will prompt you to scan a QR code that needs to be read by the camera in the smart Floodlight camera to initiate pairing, press continue on the App and a QR code should now be generated to pair the product to your account. Position your mobile or tablet device in front of the camera lens and ensure the QR code is in full frame of view, once you hear the sound prompt confirm this on the App, this will commence the final stage of pairing the smart Floodlight camera to your account.
-
Page 7: Specification
9. The app will now search for the device and register is to your account. 10. Enter the device name. Note: The device name will also be used by Amazon Alexa and Google Home. Specification • Item no.: 2940521 • Power: rechargeable battery, DC 5V •... - Page 8 4. My device can't be connected to network with App • Make sure the device is under the config status (indicator light is flashing quickly). • Make sure the Wi-Fi is avaliable and the device is not far away from the router.
-
Page 9: Tech Support
and your body. Tech Support *You can find much more useful information in the Help Center in the App. You can aslo contact us via the Help Center Feedback in the App or tech support email: support.us@venztech.com.
Need help?
Do you have a question about the R9052 and is the answer not in the manual?
Questions and answers