Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Powermat PM-APW-20C
- Page 1 PM0744 USER MANUAL BATTERY SAW ON BOOM PM-APW-20C ORIGINAL INSTRUCTIONS...
-
Page 2: Table Of Contents
Table of Contents Table of Contents ..............................2 WARNING / INFORMATION SYMBOLS ..................3 INTENDED USE OF THE DEVICE ......................... 5 SAFETY RULES ........................5 General safety instructions ....................5 Protection against electric shock ..................6 General safety regulations for power tools .......... -
Page 3: Warning / Information Symbols
DECLARATION OF CONFORMITY ........................23 WARNING / INFORMATION SYMBOLS ATTENTION: Before using the device, carefully read the operating instructions and safety ATTENTION: Before using the device, carefully read the operating instructions and safety instructions. Keep the instructions. ATTENTION: The charger should only be used in dry rooms. ATTENTION: The charger should only be used in dry rooms. - Page 4 ATTENTION: Wear safety goggles. ATTENTION: Wear safety goggles. ATTENTION: The use of a dust mask is recommended. ATTENTION: The use of a dust mask is recommended. ATTENTION: Wear protective gloves. ATTENTION: Wear protective gloves. ATTENTION: Wear appropriate safety shoes. ATTENTION: Wear appropriate safety shoes. ATTENTION: Use a protective helmet.
-
Page 5: Intended Use Of The Device
APPLICATION The cordless chainsaw with boom (hereinafter referred to as the saw) is designed for pruning trees and shrubs from ground level. The saw can be used without the boom extended to the lowest branches or the boom. The device is not intended for any other applications (e.g. -
Page 6: Protection Against Electric Shock
The protective device and personal protective equipment are intended to protect your own health and the health of third parties and to guarantee that the device will function properly. ABOUT ABOUT PROTECTION AGAINST ELECTRIC SHOCK PROTECTION AGAINST ELECTRIC SHOCK • Note that the mains voltage corresponds to the data on the rating plate. - Page 7 Also, do not pull the plug out of the socket by pulling the cord. The cable should be protected against high temperatures and kept away from oil, sharp edges or moving parts of the device. Damaged or entangled cords increase the risk of electric shock. •...
-
Page 8: Safety Instructions For Working With Chainsaws
• Store unused power tools out of the reach of children. Do not share the tool with people who do not know it or have not read these regulations. Power tools used by inexperienced people are dangerous. • Proper maintenance of the power tool is necessary. Check that the moving parts of the device are working properly and are not blocked, whether the parts are not cracked or damaged in a way that would affect the proper functioning of the power tool. - Page 9 • Always maintain a stable position at work. The chain saw may only be used when standing on a stable, safe and level surface. Slippery or unstable surfaces, such as when working with a ladder, can lead to loss of balance or loss of control over a chain saw.
-
Page 10: Additional Safety Instructions
• Do not take an unnatural position when cutting, or cut with the saw at a height above the shoulders. This avoids unintentional contact with the top of the bar tip and makes it easier to control the saw in unexpected situations. -
Page 11: Safety Instructions For Chargers
Gases may damage the respiratory tract. • The battery should only be used in conjunction with the Powermat product for which it was intended. This is the only way to avoid overloading, which is dangerous to the battery. -
Page 12: Technical Data
To increase operational safety, it is recommended to use a residual current device with a residual current of no more than 30 mA. The earth leakage circuit breaker must be checked before each use. TECHNICAL DATA Model PM-APW-20C Battery voltage DC 20V Battery capacity... -
Page 13: Description Of The Device Construction
DESCRIPTION OF THE DEVICE No. | Mark No. | Mark Cutting chain Shield (guide) Mounting screw (not shown in the picture) Tensioning wheel Chain sprocket cover Blocking wheel Telescopic connector Button for adjusting the angle of the cutting unit Telescopic rod locking sleeve 10 Telescopic tube 10 Telescopic tube 11 Telescopic collar... -
Page 15: Installation
ONTAŻ ONTAŻ Connecting parts (Fig. 1.) • Lock the end of the hexagonal aluminum telescopic tube (10) and end of the tube below the saw head (7) until it stops. When locking both pipes, make sure that the end (10a) of the hexagonal aluminum pipe matches the nut (7a) at the end of the pipe. -
Page 16: Operation
The chain tension of the chain (1) is important for both the safety of the user and the function of the battery saw. A correctly tensioned chainsaw will extend the life of the device. The chain tension must be checked before each use of the battery saw. -
Page 17: Cutting Techniques
Press the angle adjustment button (8) and simultaneously tilt the saw head (7). When the button is released, it is locked in the desired position. Engine on / off Make sure you are standing in a stable position with both hands holding the saw away from your body. Before switching the saw on, make sure that it does not come into contact with other objects. -
Page 18: Battery Connection / Disconnection
DISCONNECTING / DISCONNECTING THE BATTERY DISCONNECTING / DISCONNECTING THE BATTERY WARNING: Before making any adjustments, make sure that the tool is turned off. • Hold the tool with one hand and the battery with the other (15). • To install: push and slide the battery into the battery port, make sure the release latch on the back of the battery snaps into place and the battery is secure before you start working. -
Page 19: Replacing / Turning The Saw Chain And Guide Bar
If you notice oil leakage during the test, it means that the automatic lubrication system is working fine. If - despite the full tank - no traces of oil appear on the paper, contact a Powermat service center. RZECHOWYWANIE RZECHOWYWANIE The oil must be removed from the tank before storage. -
Page 20: Service
SERVICE Electrical tools should be repaired only by qualified personnel using original spare parts. This ensures safe use of the device. Address: Powermat service ul. Obrońców Poczty Gdańskiej 97 42-400 Zawiercie Tel. 32 670 39 68, internal 4 e-mail: serwis@powermat.pl... -
Page 21: Part Diagram
PART DIAGRAM... -
Page 22: Disposal Of Used Devices
You can also refer the old device to a collection point. For more information on storage points for used equipment, please visit: https://sklep.powermat.pl/webpage/pl/recycling.html MANUFACTURER'S DATA PH Powermat TMK Bijak Sp. Jawna Ul. Obrońców Poczty Gdańskiej 97 42-400 Zawiercie https://powermat.pl... - Page 23 DECLARATION OF CONFORMITY...
Need help?
Do you have a question about the PM-APW-20C and is the answer not in the manual?
Questions and answers