Flowcine xSPINE Easyrig Vario 5 Mounting Instructions

Easyrig Vario 5 mounting instructions
The Vario 5 installation is done in two steps. The mounts on the Vario 5 will stay on the Easyrig all the time,
while the other mounts are quickly removed when needed.
.
Please take of the plastic cover and remove the Vario 5 from the Easyrig vest. Keep the
nuts and screws.
1. Attach 12 x M6x12 with washers,
through the four slots on the
backside Easyrig Vario 5. Note the direction
of the four aluminium bars, that will sit inside
the slots.
2. Attach 2 x 1/4" screws on the
xSPINE. This mount can be removed
when not needed or stay in place.
VARIO 5 INSTALLATION