Nanosyncs is a universal synchronisable audio clock reference with multiple outputs and integrated video black & burst generator. Table of Contents Front Panel page 2 Back Panel page 4 Installation page 6 Unit Operation page 7 User Manual User Manual...
Super Clock). The six yellow LEDs indicate the selected multipliers. 1. Power Switch 5. Setup Keys Turns the power to the Nanosyncs on and off. Pressing the MENU key enters setup mode, the blinking LED indicates the 2. Reference LEDs current selected reference source.
8. Mains Input Two linked BNC connectors, high impedance. LTC time code can be linked EN 60320, two pole. Use only the supplied AC power cord for the mains through as the speed reference for the Nanosyncs audio clock generator. connection.
If you need more clock signals you should use a word clock distribution Press the Power key to switch the Nanosyncs on. The unit starts up with a unit or you can feed a maxium of 3 units with one output. Where possible LED test (all on) for 1 second and shows then the installed firmware version link identical machines together with very short cables.
Page 5
LTC time code. Only forward running timecode within are only for film, video and special audio transfers. In normal operation all a +/- 10% window, is used as a reference. Nanosyncs will perform a very these LED,s should be off.
Declaration of Conformity Rosendahl Studiotechnik GmbH Isoldenstraße 26 D-80804 München herewith confirm that the product: Type: Audio and Video Sync Generator Model: Nanosyncs meets the requirements of the council of the European communities relating to electromagnetic compatibility (Council Directive 89/336/EEC)
Need help?
Do you have a question about the Nanosyncs and is the answer not in the manual?
Questions and answers