Download Print this page

ProFlow PFEST9BK Installation Manual

Ford falcon ba/bf/fg undercar surge tank

Ford Falcon BA/BF/FG Undercar Surge Tank

PFEST9BK Surge Tank 2.0L

M8 x 40mm Hexagon Flange Bolts + Washers ISO 4162

M6 x 12mm Socket Head Cap Screw ISO 4762

WARNING: PLEASE READ ALL INSTRUCTIONS BEFORE PROCEEDING. PROFLOW WILL NOT BE

RESPONSIBLE FOR ANY DAMAGE AS A RESULT OF THE INCORRECT INSTALLATION OF THIS

PRODUCT. IT IS RECOMMENDED THAT A QUALIFIED AUTOMOTIVE TECHNICIAN PERFORMS THIS

INSTALLATION.

WARNING: THE INSTALLATION OF THIS PRODUCT REQUIRES THE HANDLING OF FUEL. IT IS

RECOMMENDED TO WORK IN A WELL-VENTILATED AREA AND WEAR APPROPRIATE PERSONAL

PROTECTION. KEEP ALL IGNITION SOURCES AND FLAMES AWAY FROM THE VEHICLE AT ALL TIMES.

INSTALLATION MANUAL

PFEST9BK

Included Items

QTY

Table of Contents

Do you have a question about the PFEST9BK and is the answer not in the manual?

Page 1 M8 x 40mm Hexagon Flange Bolts + Washers ISO 4162 M6 x 12mm Socket Head Cap Screw ISO 4762 WARNING: PLEASE READ ALL INSTRUCTIONS BEFORE PROCEEDING. PROFLOW WILL NOT BE RESPONSIBLE FOR ANY DAMAGE AS A RESULT OF THE INCORRECT INSTALLATION OF THIS PRODUCT.
Page 2 Fuel Pump Plumbing Single Pump 1. Bolt the single fuel pump bracket (PFEBOSBKBLK purchased separately) to the surge tank with M6 screws using the two threaded holes. 2. Insert your 044 style fuel pump into the bracket with the supplied rubber sleeve. 3.
Page 3 Figure 2 Note: This dual pump setup uses a 90 degree push-lock fitting with an AN8 straight fitting to plumb the inner fuel pump. Ensure all connections are securely fastened and all hose clamps are tightened. Surge Tank Installation 1. Disconnect the battery from the vehicle 2.
Page 4 Note: This surge tank must always be mounted in the orientation shown above if mounting elsewhere on the vehicle or using it universally (vertically). PROFLOW LIMITED WARRANTY This product is warranted to be free from defects in materials and workmanship for a period of one year from the original date of purchase.