Page 2
Electrical: CAUTION: Voltage changes require wiring changes at drive motor. WARRANTY DOES NOT COVER unauthorized wiring changes/failures. Consult an electrician an electrician if your not familiar with electrics. K10HS SETUP • BEFORE STARTING OR CONNECTING ELECTRICAL VERIFY THE PHASE AND VOLTAGE OF THE UNIT.
Page 3
BASIC OPERATION 1. Be certain correct wiring is matched to motor. 2. Always keep flanges clean and tight against the abrasive wheel. 3. Be certain work piece is securely clamped in the vise. Any movement in the work piece during cutting will result in broken abrasive cutoff blades. 4.
Page 4
ITEM NO. PART NUMBER DESCRIPTION QTY. 050-008 K10 BASE 3PH MOTOR AND SWITCH MODIFIED GUARD, SPARK 342-008MOD DEFLECTOR FOR K10HS SAW ITEM NO. PART NUMBER DESCRIPTION SRMZ011008 10-24 X 1/2 SLT ROUND MS Z 486-007 3HP 3PH MSWZ010 #10 M.S. F/W Z...