Baltra BHC-102 Troubleshoot Manual

FIRST USE OF THE APPLIANCE

After removing all the packing material, clean the heating cup by filling with clean water.

Connect the cord properly to the heating cup and ensure that it is fitted properly.

Before connecting the heating cup to the power supply please check the voltage in your home. If
power supply is as per the specification mentioned in the product and still product is not
working then contact Baltra Customer Care at 1800115060.

User must note that you may experience fume coming out from the heating cup for the first
time. Therefore it is suggested to boil the water and rinse it thoroughly twice before using. Open
the Lid carefully as the Metal Body may be heated.
IMPORTANT SAFETY INSTRUCTIONS
When using Electrical appliance, the following basic safety precautions should always be followed:
1. Do not use the appliance without water in it. Dry cooking is forbidden to this cup.
2. Never open the lid of the heating cup while it is still in operation, switch off the appliance first.
3. Be careful while washing so that water do not enter the socket/Base.
4. Always remove the plug from the socket :

After use

In case of any malfunction

Before cleaning
5. Never use the devise unsupervised. Switch off the device whenever you are not using it, even
this is for a moment.
6. Do not use the device with Moist Hands.
DE-SCALING
1. If water taking time in boiling more than its stipulated time, this is the sign that de-scaling is
required.
2. Scale can cause the damage to the appliance and may damage the element of the appliance.
Troubleshoot Guide
Baltra Heating Cup BHC – 102