sleep8 SLP82043 Quick Start Manual

What's Inside

The Sleep8 Device

Your Sleep8 uses ozone to support
your CPAP supplies and
accessories.

The Bag

Where the magic happens. Connect
your Sleep8 device to the filter bag
for simple support of all CPAP
components.

The Charger

Power up your Sleep8 device using the
micro USB charger.
Have questions or need replacements?
Visit MySleep8.com or call 888-549-9799.
We recommend changing the bag every 3
90
months, with daily use, to keep the filter in
working condition. Sign up to get automatic
Days
bag resupplies at MySleep8.com.
Indications of Use, Cautions & Specifications
Indications of Use: You are responsible for your own actions, so be sure to familiarize yourself
with all included instructional and safety information before use. Sleep8 is designed to support a
Positive Airway Pressure (PAP) machine's supplies and accessories. Individuals who use a PAP
machine for Obstructive Sleep Apnea (OSA) can use Sleep8 to support all PAP supplies and
accessories on a daily basis.
Always wipe your PAP mask clean to remove any visible dirt or oils prior to use. Sleep8 can be
wiped down with a slightly damp cloth for cleaning. Filter bags should not be cleaned, only
replaced if they become soiled. The tubing must be disconnected from the PAP machine, then
connected to the Sleep8 bag's internal port. All supplies and accessories should be zipped inside
the bag. Before operation check for secure connections or any potential leaks. If you find any
potential leak areas, please do not start the process and instead contact support@mysleep8.com.
DANGER: Do not operate in sealed rooms smaller than 9ft x 9ft x 9ft.
DANGER: Keep away from water sources, including rain, bathtubs, sinks, and pools.
DANGER: Do not start Sleep8 if the bag is not zipped closed.
DANGER: Keep away from open flame or fire.
DANGER: Keep away from children. It is not a toy.
DANGER: Do not use in explosive air environments, near gas vapors, or other flammables, etc.
DANGER: Do not place any items on top of your Sleep8 or bag, particularly flammables or
ignitable items.
DANGER: Never place any living thing inside the Sleep8 bag.
WARNING: Do not dismantle the Sleep8 device.
WARNING: Do not run the Sleep8 device for more than 2 hours consecutively.
WARNING: There are sensitive electronics inside the Sleep8 device. If your Sleep8 device or
bag is soiled, wipe it clean with a dry cloth. Do not submerge your Sleep8 or the bag, and do
not use any chemical cleaners to clean them.
WARNING: Do not use Sleep8 while your PAP machine is in use. Sleep8 is not a PAP machine.
WARNING: Do not open bag while Sleep8 is in use.
WARNING: If a leak is detected during operation, vacate the room and close the door. Wait
for 2 hours before entering the room again.
WARNING: Do not place or operate the Sleep8 on surfaces hot enough to start a fire or cause
the device to melt.
REASONS TO STOP USE: Sleep8 should not be used to clean masks that have come in
contact with lotions, creams, oils, or fragrances. Discontinue use of the CPAP if you develop
any acne or rash along mask contact area. If the device breaks or malfunctions, please
contact the manufacturer. There is no end user maintenance or repair.
Electrical Characteristics: Environmental Characteristics:
Input to charger: AC 100-240V~ 50/60Hz 0.2A This device is designed for indoor use, at
Input to device: DC5V / 1A Power <4W altitudes up to 3,000M, between 5°C - 40°C.
Device voltage: 3.7V / 2600mah For use at relative humidity equal to or less
Power consumption: 5W Max than 80% at temperatures up to 31°C
Battery: 1 lithium ion battery, 2600 mAh. UL listed, decreasing linearly to 50% relative humidity
Passed UN 38.3 at 40°C.
Note: The micro USB port is rated and designed Operating: 50˚F to 100˚F, 15% to 70%
for no more than 5 Volts. Please only use official humidity.
Sleep8 charging cable and power supply. Storage: 32˚F to 131˚F, 15% to 70% humidity.
Included power supply is Overvoltage Category I,
including multiple internal protections.
Sleep8 has been tested and found to comply within the limits for a Class B digital device, pursuant
to Part 18 of FCC rules. FCC 47 CFR Part 18:2019. ICES-001, Issue 4, June 2006.
The included adapter is ETL and RoHS certified.
Patent Pending. Model No: SLP82043
Additional safety information can be found in the Operator Safety Manual.
V10 - This document was Issued on 2020-5-6 and was current as of the issue date.
Quick Start Guide
Supporting all CPAP supplies and accessories