Summary of Contents for NING JIA 588 Series
- Page 1 Instructions to Usage 588 Series Operation Manual for Lithium Battery Chain Saw Before using this product, please carefully read all the tips, warnings and operating instructions of this product.
-
Page 2: Table Of Contents
Catalog Warning............1 Specifications and parameters. -
Page 3: Warning
Statement Dear users: This product is a high-quality product developed by us. According to the actual operation conditions, it is a newly designed product, which is excellent and reliable, can meet the operation requirements under the extreme working conditions, and is a professional electric tool. Meanwhile, high-quality service and professional technical service support are provided for the product. - Page 4 Oil filling quantity (ml /S) 5-15 Input voltage of charging adapter AC110-240V 50/60HZ (optional) Output voltage/current of charging 25.4V/1A 50.4V/1A adapter (optional) Output power of charging adapter 25W/50W (optional) Operating environment -10-60℃ Operation panel functions and settings: Description of display screen and operation functions of chain saw Display Icons or Content...
- Page 5 key (last for 3s) to start forced oil injection, the figure “ ”is flashing, the oil pump starts, and then long press the key (3s) to stop oil injection. Temperature display of ℃ Celsius degree Not operable driver board 1. Oil quantity setting: press the key until the number before "1"...
- Page 6 meanings before using the tool. Read the instructions don’t let the tool get wet Wire breakage Warning/danger Wear safety glasses Wear protective clothing Wear earmuffs Wear anti-skid boots Chain saw moving direction Oil pot Recycling Prevent saw jumping Away from fire Away from damp environment When repairing, prohibit rotating Rotating parts, and be careful...
-
Page 7: Safety Specifications
Safety specifications Scope of application of this tool: Saw off tree-shaped timber, trim branches, and cut down some small-diameter trees. It is suitable for trimming trees in forest farms, gardens and family gardens. Safety matters during operation （1）The use of unmarked and unrecognized battery packs and chargers may cause fire or explosion, which may cause serious fatal injuries and property losses. -
Page 8: Requirements For Operators
5) In order to guarantee the service life of the battery, charge and discharge the battery at least once every three months. Requirements for operators Warning！ If the user fails to read and understand the contents of the operation manual, it is forbidden to use and touch the chain saw, battery pack and charger, otherwise it will cause serious injury or death to the user or others. -
Page 9: Requirements For Working Environment
a. Please wear protective gloves when you are in working state. 8 Inappropriate shoes may lead to slipping or falling. If users touch the sawchain after falling,it will cause injury to them. a. Please wear protective boots. Requirements for working environment Requirements for surrounding safety 1. -
Page 10: Notes Of Guide Plate Safety
4. Only accessories and fitting parts provided by the original factory can be used. 5. When installing the guide plate and chain, please follow the instructions of the manual. 6. When installing the accessories, please refer to the steps in the instructions of the manual. - Page 11 his work, He may be tripped or fell on the ground, which may cause serious injury. a. Keep calm and work in a planned way. b. Do not use the chain saw in dim and low visibility environment. c. Please operate your own chain saw. d.
-
Page 12: Notices Of Branches Trimming
Notices of branches trimming If the tree is cut off, and its lower side branches are cut off first, the trunk would not be supported by the branches. Then the tree would roll, resulting in serious or fatal injury. a. Turn the main trunk over and trim the branches on its upper surface. b. -
Page 13: Explanation Of Drawing Force Warning
The following conditions may cause the chain saw to rebound: The running chain saw guide head touches a hard object. 2. The running chain saw guide head is touched by a hard object. Explanation of drawing force warning When cutting from top to bottom with the guide plate, the drawling force of the chain saw is in the opposite direction to the operator. -
Page 14: Cleaning, Maintenance And Repair
a. Grasp the chain saw handle tightly with two hands. b. Operate the chain saw as described in the manual. c. Keep the guide plate cut upward vertically. d. Please cut at full speed when cutting. Cleaning, maintenance and repair Under the condition of cleaning, maintenance and repair, the battery pack must be removed before the chain saw can be cleaned and repaired, otherwise the chain saw may suddenly start,which will lead to serious injury... -
Page 15: Chain Assembly And Disassembly
contact the manufacturer or distributor as soon as possible. Chain assembly and disassembly Please cut off the power supply when performing the following operations: remove the battery pack！ Installation of the chain and guide plate The parameter specifications of the guide chain and chain wheel are listed in the parameter table 1.Turn off the power supply of the chain saw, and remove the battery pack. -
Page 16: Add Chain Oil
1.Turn off the power supply of the chain saw, and remove the battery pack. 2. Turn the nut ① counterclockwise and the nut becomes loose. 3. Adjust tension adjusting bolt ③ a. The chain driving tooth is close against the bottom of guide plate groove. B. -
Page 17: Chain Wheel Inspection
Warning Please add the special lubricating grease provided by the manufacturer. Timely adding grease can increase the service life of the gear box. （1） When the accumulated working time reaches 5 hours, it is necessary to add lubricating grease to the gear box once. （2）Use a wet cloth to clean the oil pot and the surroundings of nozzle. -
Page 18: Inspection Oil Pump Oil Output
（2）Check the chain and guide plate. （3）Measure the depth of the guide plate groove, it shall not be less than 3.8mm. （4）Please replace it with a new guide plate timely when the following conditions are met: a. The guide plate is damaged. b. -
Page 19: Start Inspection
Startup inspection （1）Please ensure that there is no children or other non-working staff on the working site, meanwhile, please observer whether there are animals nearby. （2） Wiring: Insert the machine plug into the socket of the controller, and insert the plug of controller into the socket of the battery. （3）On/off operation: a. -
Page 20: Logging Operation
d. According to the length of guide plate, the cut tree should be exposed at the guide plate head. According to the thickness of the tree to be cut, provide appropriate pressure. ＞（2）Branch trimming a. Put the chain saw on the branches to be trimmed. b. -
Page 21: Chain Saw Cleaning
2. Root treatment of cut trees. a. Clear obstacles under the trees and the working area. b. Clean up the redundant parts of the tree root. C. First cut vertically and then horizontally to clear the excess parts of the root. 3. - Page 22 Maintenance （1）Maintenance of chain wheel Install the chain wheel normally according to the instructions. b. If the chain wheel is damaged or has defects, please replace it timely, otherwise, don’t use the equipment. (2) Maintenance of guide plate: If there is burr on the edge of guide plate groove, please polish or replace it timely.
-
Page 23: General Safety Warnings For Electric Tools
power supply pack Software Protection action Auto recovery over-current Motor failure and Replace the motor, Lack of phase broken wire check the wire Low buttery Low buttery power Replace the battery quantity supply quantity pack Reserved Reserved Reserved Check the oil pump The oil pump fails Oil pump failure line or replace the... -
Page 24: Safety Warnings For Rechargeable Electric Chain Saw
Flexible wires suitable for outdoor use will reduce the risk of electric shock. f. If it is inevitable to operate electric tools in humid environment, a residual current device (RCD) shall be used. Using RCD can reduce the risk of electric shock. （3）Personal safety a. - Page 25 starting the chain saw, ensure that the chain does not contact any object. During operating the chain saw, even very short-time distraction may cause that your cloth or body parts are rolled in the chain. （2）Please use hand to hold the rear handle and necessary assistant handle. （3）As the chain may touch the concealed wires.
-
Page 26: After-Sales Service
reaction forces may cause the chain saw to run out of control and cause serious personal injury. (4) Do not only rely on the safety device provided on chain saw. (5) As a chain saw user, you should take various measures to prevent accidents or personal injuries during cutting operations. - Page 27 Product conformity certificate Product Model Product number Inspector Operating voltage: Charging voltage: Lithium battery: The final explanation right of this product belongs to the company. The pictures in this manual are for reference only, and the actual product shall prevail. Any updates will be made without prior notice. Card kept by the seller Model........
- Page 28 Accessories provided with the machine: Please carefully open the package and check whether the parts are complete: 1、 Lubricator 1; 4Chain wheel (powder metallurgy) 1; 7Diamond file 1 2、 Oil bottle 1;5.Hexagon socket wrench 1; 3、 Rack 1; 6. Dual-purpose screwdriver 1 General components: 6-inch guide plate and 1/4 chain of 38 links need to be purchased separately (when cutting branches below 100mm, 6-inch guide...
- Page 29 Listof materials...
- Page 30 Memo...