Table of Contents
Advertisement
Quick Links
1
Open the device, placing the bottom part of
the device at about a 45degree angle into
the bottom edge of the case.
2
Bottom - Press in Keyboard
With the device in an upright position, press
the sides of the keyboard down into the case
until securely attached. Press the back corners
of the case to ensure it is securely attached.
ASSEMBLY - EXO FOR CHROMEBOOKS
3
Top Case
Align the top device edge with the top
case edges where the angled material
starts. Using your fingers, slide the
case down, onto the device.
4
Close the device. Working from the left, push
the left corner of the case onto the device,
push the middle of the spine, and lastly, push
the right corner onto the device.
Advertisement
Table of Contents
Summary of Contents for Brenthaven Exo
- Page 1 ASSEMBLY - EXO FOR CHROMEBOOKS Top Case Bottom Case Align the top device edge with the top Open the device, placing the bottom part of case edges where the angled material the device at about a 45degree angle into starts. Using your fingers, slide the the bottom edge of the case.
- Page 2 REMOVAL - EXO FOR CHROMEBOOKS Top Case - Back Spine Bottom Case With the device closed, pull the back corners With the device open, use your fingers to and back edge of the case o the device. push the back corner clips o of the device.
Need help?
Do you have a question about the Exo and is the answer not in the manual?
Questions and answers