Download Print this page

IC CUBED Chilly Dog Installer's Manual

K-9 safety, vehicle climate controller

Advertisement

Quick Links

SM
Chilly Dog
Version PLUS 2004.03
K-9 SAFETY, VEHICLE CLIMATE CONTROLLER
INSTALLER'S GUIDE w/OPERATING INSTRUCTIONS
Patented Technology
TM
By IC CUBED
Read This Manual Completely
Before Beginning Installation!
TM
LIMITED WARRANTY
IC Cubed warrants that all IC Cubed products are free from defects in workmanship
and materials from the factory. IC Cubed will repair or replace any part or parts
that IC Cubed has examined and that IC Cubed is satisfied were originally defective.
Defective parts must be returned to IC Cubed accompanied by a copy of the
corresponding IC Cubed invoice with transportation charges prepaid within one
year of the date of purchase.
This warranty is void if the products or parts have been subject to improper
installation, misuse, accident, negligence, or unauthorized service. This warranty
is void if the unit(s) have been modified or if the unit(s) are used in a fashion
not intended by IC Cubed. This warranty does not cover service or labor charges
that may be incurred during replacement or repair.
IC Cubed will not be responsible for expense, loss, or damage caused indirectly
or directly by the use of IC Cubed products, or any other cause.
No person, dealer or agent is authorized to make modifications or additions
to this warranty or to assume any other liabilities on behalf of IC Cubed.
Removing or defacing serial numbers or other identification, or accessing
internal components will void the warranty stated above.
The rights granted to you by this warranty may be supplemented or restricted
by state law.
IC Cubed reserves all rights to design of logic and hardware
configurations used in all IC Cubed products. All components
used in IC Cubed products are protected by patents held by
or licensed to IC Cubed.
Copyright IC Cubed 2003
For assistance call 877-ICCUBED

Advertisement

loading
Need help?

Need help?

Do you have a question about the Chilly Dog and is the answer not in the manual?

Questions and answers

Summary of Contents for IC CUBED Chilly Dog

  • Page 1 IC Cubed warrants that all IC Cubed products are free from defects in workmanship and materials from the factory. IC Cubed will repair or replace any part or parts that IC Cubed has examined and that IC Cubed is satisfied were originally defective.
  • Page 2 1. BLACK, Chassis Ground 2. GREY, Override input Negative hood switch Feature Programming Button Tach/Feature Programming LED view port 3. VIOLET, Tachometer input Large 12 Pin 4. White/Blue, Activation input/Keep alive/ Program selector Main Control Unit 5. ORANGE, HI temperature output 200mA Negative Part# MCU 6.
  • Page 3 Page 13: Operating Instructions, AC setup, CTD description Page 14: Modes of operation Sun visor CTD04 The Chilly Dog Kit comes with the following; Main Control Unit (MCU) Programmable Temperature Display (CTD) w/mounting hardware 12 ft Extension Cable for CTD...
  • Page 4 4. White/Blue, Activation input/Keep alive/ Program selector Installing the Remote Temperature Probe (Cp04) A pulse negative input at this wire performs multiple functions that are You must however, take care not to locate the RP03 in front of a vent dependant on the systems corresponding mode: or in direct sunlight as this will cause the system to have an inaccurate In Standby or Ready mode a negative pulse will cause the system to enter...
  • Page 5 If the circuit is still closed, gradually move the contact away from the magnet start ready mode of the Chilly Dog. It can be connected to an until the circuit show open. If you have made this adjustment test again that interior motion sensor or pressure mat to that detects the the circuit shows closed when in park.
  • Page 6 Chilly Dog Ignition Relay Harness Connection Battery Input Ford Vehicle(s) 4th Battery Positive Input RLA Ignition Relay Yellow High Amp Ignition B Yellow Blue Activation Input Thin Yellow 3rd Battery Positive Input High Amp Ignition A Yellow Starter Wire Violet...
  • Page 7 Programming the Tachometer Signal Feature Programming Explained After the system is installed, you must program the system to register 1. The default selection enable the system to look for either a tach signal the vehicle's tach signal for proper operation. If the installation is on (also default see feature 2) or battery voltage to determine if the vehicle's a tachless diesel vehicle, then you must change feature programming.
  • Page 8 The second is designated to output 2 Remover the CTD cover. and is used to activated the High temperature alert. The Chilly Dog can also be set to start the vehicle or alert based on low temperatures.
  • Page 9 The factory default setting is 99 degrees Fahrenheit.. Even if the Chilly Dog system has not been turned on by the handler via the Ready/Standy switch, the Alert feature will trigger when the Remote High (2) Alert Mode temperature reaches 99 degrees.