Fieldmann FZH 5035 User Manual

USER MANUAL FOR
SOLAR SHOWER FZH 5035
Before you begin, please check to ensure you have all the parts.
I
Read ALL the directions before beginning.
NO Description
1 Shower head
2 Elbow Fitting
3 Handle
4 Hose Connecting
5 Teflon
6 Setscrew
7 Drain Screw
8 Foot Shower
II

Installation

In order to use our products properly and get the most satisfaction and pleasure, please pay attention to the following
details.
1. T he solar shower must be installed on solid ground (concrete floor) or concrete base to make sure its stabilization
and safety for user.
2. The solar shower is equipped with base plate, which has 4 prefabricated holes for screws installation on solid
ground or portable base.
3. For easy installation, please separately buy our portable base. Just screw the solar with the base and you could
enjoy the warm water.
4. Please install the solar shower at the location where has the most sunshine.
5. Please connect inlet of the solar shower to tap water system of your home. It is better to have the inlet of solar
shower connected to your garden tap then to the tap water system.
6. Please pay attention that it is necessary to have a tap installed before the inlet of solar shower.
7. To prevent the scalding from the hot water, extra attention to the following.
Before turn on the solar shower, please make sure the valve is at the cold water position (blue), then turn on the
valve and gradually adjust the water toward the hot water position (red), until reach the most comfortable tempera-
ture.
8. Warning! Under the exposure of the very strong sun radiations, the water temperature coming from the solar
shower may reach 60 ˚C or 140 ˚F.
QTY
1
1
1
1
1
4
1
1
Elbow Fitting
skim 2
skim 1
couper 2
couper 1
Shower Head
Screw
Cover
Handle
Foot Shower
Washer
ground
FAST ČR, a.s., U Sanitasu 1621,
251 01 Říčany, Czech Republic
www. fieldmann.eu
Main Body
Hose connecting
Drain Screw