Advertisement
2. DESCRIPTION & SPECIFICATIONS
3.
ASSEMBLY & INSTALLATION
3.1.
Assembly.
3.2.
Air Supply.
p WARNING! Ensure air supply does not exceed 120PSI. Too high an air pressure and unclean air will shorten the product life
due to excessive wear, and may be dangerous causing possible damage and personal injury.
3.3.
Shot Blast Media.
3.4.
Dust Extraction.
4. OPERATING INSTRUCTIONS
WARNING! Ensure you have read, understood and apply safety instructions in chapter 1 before using the unit.
p
Air Jet nozzle size
DRY AIR SUPPLY.
minimum
Ceramic blast output nozzle size
fig 1
fig 2
fig 3
fig 4
HOOK UP
half full.
Advertisement
