AVILO H222427 Quick Start Manual

Thank you for purchasing Steam Inhaler. We hope you will be happy with your purchase
This product is for adult use only. Please read the instructions thoroughly before using and retain them for future reference.
The Steam Inhaler should be washed in warm, soapy water before its first use and after each use.
How to assemble:
1. Remove the face piece from the base of the item
2. Connect by placing firmly over the tube that projects from the lid, ensuring it faces away from the small hole
Instructions for Use:
1.Place a few drops of inhalant (not included), if required, into the base. Always follow dosage requirements recommended
by inhalant instruction.
2. Fill base up to 2/3 with hot water. DO NOT USE BOILING WATER.
3. Take care not to tilt or drop the unit as this may spill contents. Scalding can occur if hot water comes into contact with
user
4. Place the lid and face piece carefully on the base, ensuring a snug fit
5. Grip both handles firmly, keeping your thumbs on the lid tabs
6. Place the face piece over your nose and mouth and slowly breath in
7. Always tilt your head over the inhaler and do not bring the inhaler to your face to ensure no liquid is spilled
Caution: Although the water is not boiling it will be hot
Repeat this process up to 5 times, pausing each time between breathes if required.
After the fifth time, stop using the item and breathe normally for several minutes before attempting process again.
Avoid stepping into cold air or draft immediately after use
Discard water after each use and wash unit and face piece with mold soap and warm water
Steam Inhaler