P.M.T CSG Series Instructions For Use

INSTRUCTIONS FOR USE OF CSG SERIES MODELS: 210 - 245 - 270 - 370 - 400 - 450 - 660 - 1100
2
7
3
5
2
(*) The various models differ from the length of the tube and the type of extruded product.
1.1 Sizes
Model Cartridge
CSG 210
CSG 245
CSG 270
-
CSG 370
CSG 400
-
CSG 450
CSG 660
-
CSG 1100
-
2. WARNING
This symbol focuses your attention on the points concerning your safety. Read carefully and observe the instructions included.
Before the use of the gun, read and observe the instructions carefully.
Before any repair, maintenance and replacing operations, disconnect the gun from the air supply.
Before any repair or maintenance operations, consult the retailer of the gun or the specialised staff, because wrong operations void the
warranty.
When choosing and before the use of the product to be extruded with the gun, check on the product safety sheet the compatibility with the
working environment and with the individual protective equipment used.
Never point the gun to yourself, other people, animals or things that are different from the objet to treat.
During the use, wear protective equipment (gloves, goggles, masks, overalls etc.), according to the instructions indicated on product safety
sheet. We recommend, however, to always use protective goggles.
Instructions for use CSG Series
9 8
1
4
6
10
1
8
7 9
L
Soft-pack Cartridge (ml)
-
≤310 ml
≤310 ml
≤310 ml
≤310 ml
1. PRODUCT IDENTIFICATION
D
1-
2-
3-
2
4-
5-
3
6-
7-
8-
4
9-
10-
5
6
10
Soft-pack (ml)
-
≤400 ml
- ≤400 ml
≤600 ml
- ≤600 ml
≤400 ml
- 700 ml
- 1800 ml
3
Body of the gun
Front ring nut
Control lever
Handgrip
Pressure regulator
1/4 male gas supply
Material holder tube
Quick outlet valve
Back ring nut
EC mark
PNEUMATIC APPLICATOR GUN
mod. - xxx/xxx xx - cod. xxxxxxx
P.M.T. srl - Antegnate (BG) ITALY
mm-yyyy
MAX PRESSURE 10 bar (145 psi)
L H
260 mm 263 mm
307 mm 263 mm
307 mm 263 mm
410 mm 263 mm
440 mm 263 mm
556 mm 263 mm
665 mm 263 mm
1150 mm 263 mm
D
78 mm
78 mm
78 mm
78 mm
78 mm
78 mm
78 mm
78 mm
Multilenguage