Do you have a question about the RO-PGCE-18-1 and is the answer not in the manual?
Questions and answers
Summary of Contents for Rosko RO-PGCE-18-1
Page 1
RO-PGCE Electric Countertop Panini Grill RO-PGCE-18 INSTALLATION GUIDE Operation, maintenance, and service parts RO-PGCE-18-1 RO-PGCE-18-2 955 Lachance Street Quebec, QC G1P 2H3 1-866-901-5624 Canada www.rosko-julien.ca RO-PGCE_GUIDE (01/22)
Page 2
Any installation, adjustment, modification, repair, or maintenance not in accordance with applicable standards may cause property damage, injury, or death. To ensure a safe installation and proper operation of your Rosko equipment, please read this entire guide and keep it for future reference. • This unit is intended for commercial use only.
2. PLANNING AND INSTALLATION Congratulations on the purchase of your new Rosko electric countertop panini grill! To maximize the use and durability of your unit, we recommend that you follow the instructions in this guide. Installation, operation, and maintenance procedures must be followed for warranty protection to apply.
2.3. LEVEL WARNING The panini grill must be supported by a heatproof counter or stand. Once the unit is in its final position, level the panini grill by adjusting the leveling feet. Make sure the panini grill is level in the front-to-back and side-to-side axis. It is recommended to level the unit each time it is moved. Proper leveling prevents accidents and ensures optimal cooking performance.
2.5. CONNECTION The wire entry for the connection is a 3/ 4 ” knockout located at the back of the panini grill. Use a 3/ 4 ” commercial electrical connector (not included) to insert the electrical supply wire into the unit. The connection must be done by a certified technician or electrician.
Page 7
4. To reach the terminal block, remove the grease drawer, unscrew the four (4) bolts in front of the unit and remove the two (2) front panels. (Figure 3) 5. Insert and secure the correct length of unsheathed wire in the connector to direct it to the terminal block located on the front of the unit.
3. OPERATION WARNING Never leave the thermostat knob(s) in the MAXIMUM position when the plate is not in use. This could cause the plate to overheat, turn black, and could cause damage. 3.1. FIRST USE Factory plate protection 1. Before using the unit, heat the plates to 300 °F for five (5) minutes to burn off the protective coating. 2.
3.3. PROLONGED SHUTDOWN 1. Turn the control knob to the “OFF” position. 2. Turn the thermostat knob to the “OFF” position. 3. Turn off the main electric supply. NOTE: Be sure to condition the two (2) plates before prolonged shutdown to prevent rusting and degradation of your cooking surface.
6. SERVICE PARTS 6.1. RO-PGCE-18 See figure 7 for identification of service parts Code Description 202101007 Grease Pan Drawer for Gas Griddle 913900239 Knob Ring for Control OFF/HI-LO 913200047 Infinite Switch 15 A - 240 V 913900238 Knob Ring for Control OFF/100-450 °F 913900220 Control Knob for Commutable Ring 910300014...
7. SPECIFICATIONS This guide is dedicated to the Rosko electric countertop panini grills listed below. 17'' 17'' 432mm 432mm 2'' 2'' 51mm 51mm Packaging dimension Models Width Depth Total height Cooking surface Weight (W x D x H) RO-PGCE-18-1 17 1/ 2 x 19'' 20 x 30 x 28"...
WARNING Keep this guide for future reference. CONTACT US customerservice@rosko-julien.ca 955 Lachance Street Quebec, QC G1P 2H3 1-866-901-5624 Canada www.rosko-julien.ca RO-PGCE_GUIDE (01/22)
Need help?
Do you have a question about the RO-PGCE-18-1 and is the answer not in the manual?
Questions and answers