Advertisement
4108089
Verandah Bar Stool
Parts and Hardware List
A.
Back Assembly
B.
Base Assembly
C.
Cushion
D.
Pan Head Bolts
E.
Wing Nuts
F.
Lock Washers
G.
Wood Screws
H.
Phillips Head Screwdriver
∗ Please make sure that you have all the parts and hardware indicated above before you begin assembly of this item.
∗ Use the hardware illustrations to determine correct piece and size.
∗ This item should be assembled on a soft surface to prevent scratching the finish during assembly.
∗ This item may require periodic tightening.
Hardware Illustrations
D. Pan Head Bolt
F. Lock Washer
Page 1 of 3
1 pc
1 pc
1 pc
4 pcs
4 pcs
4 pcs
4 pcs
1 pc
E. Wing Nut
G. Wood Screw
R1-10-5-02
Advertisement
Table of Contents
Related Manuals for BOMBAY 4108089
Summary of Contents for BOMBAY 4108089
- Page 1 4108089 Verandah Bar Stool Parts and Hardware List Back Assembly 1 pc Base Assembly 1 pc Cushion 1 pc Pan Head Bolts 4 pcs Wing Nuts 4 pcs Lock Washers 4 pcs Wood Screws 4 pcs Phillips Head Screwdriver 1 pc ∗...
- Page 2 4108089 Verandah Bar Stool Parts required Back Assembly 1 pc Pan Head Bolts 4 pcs Base Assembly 1 pc Wing Nuts 4 pcs Lock Washers 4 pcs Attach Back Assembly (A) Align the pre-drilled holes at the sides of Back Assembly (A) with pre- drilled holes in Base Assembly (B).
- Page 3 4108089 Verandah Bar Stool Attach Cushion Parts required Base Assembly 1 pc Wood Screws 4 pcs Cushion 1 pc Phillips Head Screwdriver 1 pc 2. Attach Cushion(C) Place the Cushion (C) into position on the Base Assembly (B). Insert Wood Screws (G) through pre-drilled holes of the metal corner plates of the Base Assembly (B) and secure by using Phillips Head Screwdriver (H).
Need help?
Do you have a question about the 4108089 and is the answer not in the manual?
Questions and answers