Table of Contents
Advertisement
Quick Links
ANALYZER X3 & X6
R
User's Manual
3 MINUTE
BATTERY
ANALYZER
W & W Manufacturing Co.
MADE IN
USA BY:
!
Table of Contents
Safety and Precautions...................................................3
Features.......................................................................4
Specifications..................................................................5
Part Overview................................................................6
Understanding the X3's adapters Cup................................7
Getting started .............................................................8
Quick Test Analysis...........................................................9
Cycle Mode....................................................................10
Auto Mode.....................................................................11
Condition Mode....................................................... .....12
Discharge Mode..................................... .........................13
Charge Mode.........................................................................14
Impedance Mode..................................................................15
Learn Mode...................................................... ............16
Universal cup operation...........................................................17
American Communication Systems
Discover the Power of Communications
http://www.ameradio.com
TO ORDER - VISIT
™
2
Advertisement
Table of Contents
Summary of Contents for W&W X3
-
Page 1: Table Of Contents
ANALYZER X3 & X6 Table of Contents Safety and Precautions……………………………………………3 User’s Manual Features……………………………………………………………..4 Specifications……………………………………………....5 Part Overview…………………………………………………….…6 Understanding the X3’s adapters Cup………………….……….7 Getting started …………………………………………..………8 Quick Test Analysis………………………………………..……..9 Cycle Mode…………………………………….…......10 Auto Mode....………………………………….…………11 Condition Mode………………………………………..…..12 Discharge Mode………………………………......13 Charge Mode.................14 Impedance Mode..............15 Learn Mode………………………………………..……. -
Page 2: Features
Always use a grounded AC outlet to power the Analyzer X3 & X6. The W&W Analyzer X3& X6 is a programmable battery tester and battery cycler capable of testing a variety of battery chemistries such as; Lithium Ion, Lithium Polymer, Nickel Cadmium and Nickel Metal Hydride. -
Page 3: Specifications
75W tota 25W/station, 150W total 25W/station 150W total Power Management : The X3 & X6 automatically regulates which station will receive max. Power during high pwr demands. Chemistries : Lion, NiCD and NiMH Charge and End of Charge Detection Protocols: On/Off Switch Li -ion, Constant current - Constant voltage Detection is achieved at C/11. -
Page 4: Getting Started
Pushed. See note below, should the aforementioned not occur. * allowed to self discharge to a level that the X3 or the X6 or a battery charger could not recognize it when the battery is placed in a charger or the *Note: If you do not see your chemistry during this process, remove the battery and reinsert it after pressing the function button momentarily. -
Page 5: Quick Test Analysis
Cycle count. Cycle 2 and 3 are often used for incoming quality control of new batteries. Batt<60%of rated capacity . Batteries that have a low state of charge when placed in the X3 for the QT The X3 will display the capacity (in percentage of rated capacity and mAH). -
Page 6: Auto Mode
To select the condition cycle follow the instructions below. With the X3 and X6, the percentage of the rated capacity of the battery being CONDITIONED is set at 80%, the 80% is set at the factory and can be modified with the use of optional software. -
Page 7: Discharge Mode
Analyzer X3 and the X6 is also given in mAh, the amount of current discharged over time. Lithium batteries are charged with a different algorithm. The Analyzer X3 and X6 applies a constant current of The rate at which the battery is discharge is called the (C) rate. 1C is the discharge current amount of the 1C until the battery pack voltage equals between 4.1 and 4.2 Volts (the exact voltage depends on the pack... -
Page 8: Learn Mode
Data Range The Analyzer X3 and X6 produce impedance results within a 15 seconds of testing and displays the impedance in Ohms on the display or on a printout when an optional printer is used. - Page 9 BATT STATUS: UNKNOWN OR GOOD 800 South Broadway PUSH <FUNCTION> TO CHANGE operations that can be performed in stations; 2 3, 5 and 6 of the X3 and X6. BATTERY TYPE = Hicksville, NY 11801 PUSH LITHIUM ION To change the cup settings for a different battery...
Need help?
Do you have a question about the X3 and is the answer not in the manual?
Questions and answers