mylife Ibiza Installation Manual

Ibiza Slate Shower Tray
Installation Manual
THIS PRODUCT MUST BE INSTALLED
BY A QUALIFIED PLUMBER

IMPORTANT - STORE TRAY ON FLAT

Prior to installation, the shower tray must be checked thoroughly for defects. In the unlikely event that the product
has a defect, it must not be installed and should be returned to the supplier who will provide a replacement, if
necessary.
Checks should include, but not limited to, the following:
 Ensure that the colour and fi nish of the shower tray is acceptable
 Ensure that the product is not cracked or chipped.
 Ensure that there is no twisting or distortions of the product.
 Ensure that the shower tray suitably drains water when levelled.
 Ensure that the shower tray is the correct size by checking lengths with a measuring tape.
The manufacturer will not be held responsible for the costs of removal or replacement of a shower tray or
any other costs incurred as a result of the shower tray having a defect if said defect was identifi able prior
to installation.
INSTALLATION OF THE SHOWER TRAY WILL BE TREATED AS

CHECKING FOR TWISTS

Place the shower tray on a fl at level surface.
Using a spirit level, ensure that all outer edges
of the shower tray are fl at and level as per
fi gure 1.
If any of the levels cannot be corrected when
embedding the shower tray, then it may be
twisted or distorted. If this is the case, then the
shower tray must not be installed and should be
returned to the retailer for replacement.
PRIOR TO INSTALLATION
ACCEPTANCE OF QUALITY.
www.mylifebathrooms.com
Figure 1