Buccan BCN-6001-1 User Manual

8-in-1 kitchen machine
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

IMPORTANT SAFETY INSTRUCTION
When using electrical appliances, basic safety precaution must
always be followed:
1. Carefully read all instructions before operating and save for
future reference.
2. This appliance is for normal household use only.
3. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appli-
ance by a person responsible for their safety.
4. Young children must be supervised to ensure that they do
not play with the appliance.
5. If the supply cord is damaged, it must be replaced before
further use by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
6. This appliance includes a safety switch which prevents oper-
ation unless the accessories are securely installed.
7. This appliance incorporates a protective device against high
temperatures. If the temperature becomes too high, the unit
will turn off automatically and will resume operation when the
motor has cooled sufficiently (after about 15 minutes).
8. Do NOT operate the appliance for more than a minute at a
stretch.
9. If operation is not finished within 1 minute, turn off the
machine and let it cool for 10 minutes before the next round of
operation. If more than 5 rounds of operation are required, cool
the machine for 90 minutes to room temperature before the
next 5 rounds. This can lengthen lifespan of the machine.
10. The temperature of accessible surfaces may be high when
the appliance is operating.
11. To protect against risk of electric shock, fire or personal
injury, do not immerse power cord, plug or motor base in water
or any form of liquid.
12. Unplug when it is not in use and before cleaning.
13. Do not immerse Motor Base in water, neither rinse it under
tap water.
14. Do not push food with fingers, or other objects (like knives),
always use the enclosed pusher for feeding food.
15. Be extremely careful when handling blades and inserts,
especially while assembling and disassembling, and cleaning
after use. Blades are very sharp.
16. Do not let power cord hang over the edge of a table or
counter, or touch any hot surface
17. Do not place the appliance near a gas outlet, electric burn-
er, or heated oven.
18. Please wait till all the components stop running before un-
plugging the power cord and taking off the processing bowl.
19. Ensure the capacities shown in the Specifications section
are not exceeded.
20. Always use a reliable earthed power supply to operate the
appliance.
21. The appliances are not intended to be operated by means
of an external timer or separate remote-control system.
KEEP THIS INSTRUCTION MANUAL FOR REFERENCE AS
IT CONTAINS IMPORTANT INFORMATION.
NL / EN - support@alleenonline.nl
BE / FR - support@alleenonline.be
BUCCAN - 8-IN-1 KITCHEN MACHINE
PART DESCRIPTION
1. Motor Base
2. Knob
3. Driver
4. Processing bowl
5. Blade adapter
6. Bowl cover
7. Pusher
8. Emulsifying disc
9. Kneading blade
10. Chopper blade
11. French fry blade
12. Shredding blade
13. Slicing blade
14. Blade holder
15. Blender jar
16. Blender lid
17. Center measure cup
18. Citrus juicer
19. Cones
© 2020 The investment Company Europa B.V., Buccan and all the logos are
trademarks of The Investment Company Europe B.V. Licensed to The Investment
USER MANUAL
Model: BCN-6001-1
Company Europe B.V. All rights reserved.

Advertisement

Table of Contents
loading

Summary of Contents for Buccan BCN-6001-1

  • Page 1 KEEP THIS INSTRUCTION MANUAL FOR REFERENCE AS IT CONTAINS IMPORTANT INFORMATION. © 2020 The investment Company Europa B.V., Buccan and all the logos are NL / EN - support@alleenonline.nl trademarks of The Investment Company Europe B.V. Licensed to The Investment Company Europe B.V.
  • Page 2: Before First Use

    BEFORE FIRST USE 1. Position Driver on motor base. 2. Position processing bowl into the Driver and turn clockwise After unpacking, disassemble unit before using first time. Refer to “HOW TO DISASSEMBLE” for directions. to seat firmly on motor base. Wash all parts except motor base in warm, soapy water.
  • Page 3: Blender Assembly

    EMULSIFYING PLATE ASSEMBLY CITRUS ASSEMBLY Please install the citrus juicer attachments as shown on the picture. BLENDER ASSEMBLY 1. Position Driver on motor base. 2. Position processing bowl into the Driver and turn clockwise to seat firmly on motor base. 3.
  • Page 4: Cleaning Instructions

    DISASSEMBLE INSTRUCTIONS 1. Remove pusher. Turn cover counterclockwise, lift and re- move. 2. Lift blade holder from driver. 3. Lift blade and remove from blade holder. 4. Turn bowl counterclockwise to unlock from motor base. Lift and remove. CLEANING INSTRUCTIONS Wash all parts except motor base in warm, soapy water.
  • Page 5 BEWAAR DEZE HANDLEIDING VOOR VERWIJZING, ZOALS HET BELANGRIJKE INFORMATIE BEVAT. © 2020 The investment Company Europa B.V., Buccan and all the logos are NL / EN - support@alleenonline.nl trademarks of The Investment Company Europe B.V. Licensed to The Investment Company Europe B.V.
  • Page 6: Voor Het Eerste Gebruik

    VOOR HET EERSTE GEBRUIK 1. Plaats de driver op de motorbasis. Demonteer het apparaat na het uitpakken voordat u het voor het eerst gebruikt. Raadpleeg “HOE TE DEMONTEREN” voor 2. Plaats de bewerkingskom in de driver en draai met de klok een routebeschrijving.
  • Page 7 EMULGERENDE PLAATASSEMBLAGE CITRUS VERGADERING Installeer de opzetstukken van de citruspers zoals weerge- geven op de afbeelding. BLENDER MONTAGE 1. Plaats de driver op de motorbasis. 2. Plaats de bewerkingskom in de driver en draai met de klok mee om stevig op de motorbasis te zitten. 3.
  • Page 8 DEMONTAGE INSTRUCTIES 1. Verwijder de stamper. Draai het deksel linksom, til het op en verwijder het. 2. Til de meshouder uit de bestuurder. 3. Til het mes op en verwijder het uit de meshouder. 4. Draai de kom linksom om te ontgrendelen van de motorba- sis.
  • Page 9: Consignes De Sécurité Importantes

    CONSERVEZ CE MANUEL D’INSTRUCTIONS POUR RÉFÉRENCE CAR IL CONTIENT DES INFORMATIONS IM- PORTANTES. © 2020 The investment Company Europa B.V., Buccan and all the logos are NL / EN - support@alleenonline.nl trademarks of The Investment Company Europe B.V. Licensed to The Investment Company Europe B.V.
  • Page 10 AVANT LA PREMIÈRE UTILISATION 1. Positionnez le pilote sur la base du moteur. 2. Positionnez le bol de traitement dans le conducteur et Après le déballage, démontez l’appareil avant la première utilisation. Reportez-vous à «COMMENT DÉMONTER» pour les tournez-le dans le sens des aiguilles d’une montre pour qu’il instructions.
  • Page 11 ASSEMBLAGE DE LA PLAQUE ÉMULSIFIANTE ASSEMBLAGE D’AGRUMES Veuillez installer les accessoires du presse-agrumes comme indiqué sur l’image. ASSEMBLAGE DU MÉLANGEUR 1. Positionnez le pilote sur la base du moteur. 2. Positionnez le bol de traitement dans le conducteur et tournez-le dans le sens des aiguilles d’une montre pour qu’il repose fermement sur la base du moteur.
  • Page 12: Instructions De Nettoyage

    INSTRUCTIONS DE DÉMONTAGE 1. Retirez le poussoir. Tournez le couvercle dans le sens antiho- raire, soulevez et retirez. 2. Soulevez le porte-lame du conducteur. 3. Soulevez la lame et retirez-la du porte-lame. 4. Tournez le bol dans le sens antihoraire pour le déverrouiller de la base du moteur.
  • Page 13: Wichtige Sicherheitshinweise

    BEHALTEN SIE DIESE BEDIENUNGSANLEITUNG FÜR REF- ERENZEN, DA SIE WICHTIGE INFORMATIONEN ENTHÄLT. © 2020 The investment Company Europa B.V., Buccan and all the logos are NL / EN - support@alleenonline.nl trademarks of The Investment Company Europe B.V. Licensed to The Investment Company Europe B.V.
  • Page 14: Vor Dem Ersten Gebrauch

    VOR DEM ERSTEN GEBRAUCH 1. Positionieren Sie den Treiber auf der Motorbasis. 2. Positionieren Sie die Bearbeitungsschale im Treiber und Zerlegen Sie das Gerät nach dem Auspacken, bevor Sie es zum ersten Mal verwenden. Anweisungen finden Sie unter drehen Sie sie im Uhrzeigersinn, um fest auf dem Motorfuß zu „ZERLEGEN“.
  • Page 15 EMULGIERPLATTENBAUGRUPPE CITRUS ASSEMBLY Bitte installieren Sie die Aufsätze für die Zitruspresse wie auf dem Bild gezeigt. MIXER-BAUGRUPPE 1. Positionieren Sie den Treiber auf der Motorbasis. 2. Positionieren Sie die Bearbeitungsschale im Treiber und drehen Sie sie im Uhrzeigersinn, um fest auf dem Motorfuß zu sitzen.
  • Page 16: Fehlerbehebung

    DEMONTAGE ANWEISUNGEN 1. Schieber entfernen. Abdeckung gegen den Uhrzeigersinn drehen, anheben und abnehmen. 2. Klingenhalter vom Fahrer abheben. 3. Klinge anheben und vom Klingenhalter abnehmen. 4. Drehen Sie die Schüssel gegen den Uhrzeigersinn, um sie vom Motorfuß zu lösen. Heben und entfernen. REINIGUNGSANLEITUNG Waschen Sie alle Teile außer der Motorbasis in warmem Seifen- wasser.

Table of Contents