Configuring Nokia 3510I Midp Sdk For A Jbuilder Project - Nokia 3510i User Manual

12
2 Click New to display the New JDK Wizard shown below.
Enter the following information:
• In the first text-entry field, set the JDK home path to the SDK's installation directory.
Use the adjacent button at the right to navigate to this directory.
• In the Name for this JDK field, enter a name by which you wish JBuilder to refer to
the SDK. This name is a matter of your personal preference.
• Click OK.
3 After clicking OK, you will now see in the Configure JDK dialog (below) that the SDK
has been added to JBuilder's JDK list. Note that you can also specify which JDK is used by
the SDK by entering the desired JDK version in the Emulator JDK text box.

Configuring Nokia 3510i MIDP SDK for A JBuilder Project

After configuring JBuilder to recognize the SDK as an installed JDK, as described in the
previous section, you must instruct JBuilder to use the SDK as the target JDK for the particular
project you are working on. Use the following procedure to do this:
Nokia 3510i MIDP SDK User's Guide
Configuring Nokia 3510i MIDP SDK With IDEs