Advertisement
User-Maintenance Instructions
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Do not use damaged equipment. If abnormal noise or vibration,
occurs, have the problem corrected before further use.
Inspection, Maintenance, and Cleaning
Note: These procedures are in addition to the
regular checks and maintenance explained as part
of the regular operation of the air-operated tool.
1. Periodically check all nuts, bolts,
and screws for tightness.
2. Store in a clean, dry location.
3. Clean the outside of the unit with a damp cloth.
Never use solvents to clean any parts of this tool.
Allow tool to dry completely before use.
Record Product's Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Replacement parts are not available for this item. Reference UPC 193175451514.
Page 10
For technical questions, please call 1-888-866-5797.
4. Use compressed air to blow out
debris from the load vents.
5. After each use, clean the Cable Clamps of
any possible battery electrolyte. Apply a thin
coat of silicone grease to prevent corrosion.
Item 58933
Advertisement
