Table of Contents
Advertisement
Quick Links
Installation
Four-Way
Evacuation Valve
For use with petroleum and synthetic-based oils, fuels, antifreeze, and windshield wash
fluid. For professional use only.
Not approved for use in explosive atmospheres or hazardous (classified) locations.
Model 120581
1 npt 4-Way Evacuation Valve
200 psi (1.38 MPa, 13.8 bar) Maximum Working
Pressure
Model 120601
1-1/2 npt 4-Way Evacuation Valve
200 psi (1.38 MPa, 13.8 bar) Maximum Working
Pressure.
Important Safety Instructions
Read all warnings and instructions in this
manual before using the equipment.
Save these instructions.
311881F
EN
Advertisement
Table of Contents
Related Manuals for Graco 120581
Summary of Contents for Graco 120581
- Page 1 For use with petroleum and synthetic-based oils, fuels, antifreeze, and windshield wash fluid. For professional use only. Not approved for use in explosive atmospheres or hazardous (classified) locations. Model 120581 1 npt 4-Way Evacuation Valve 200 psi (1.38 MPa, 13.8 bar) Maximum Working...
- Page 2 WARNING FIRE AND EXPLOSION HAZARD When flammable fluids are present in the work area, such as gasoline and windshield wiper fluid, be aware that flammable fumes can ignite or explode. To help prevent fire and explosion: • Use equipment only in well-ventilated area. •...
-
Page 3: Typical Installation Configuration
Typical Installation Configuration Typical Installation Configuration Application - Lube Trucks Filling Truck Tank Emptying Truck Tank PUMP PUMP HOLDING TRUCK BULK TRUCK TANK TANK WASTE OIL TANK Fill Tank Mode Empty Tank Mode 311881F... -
Page 4: Maintenance
Maintenance Maintenance Recycling 1. Use a spanner wrench with pin diameter of 1/4 in. End of Product Life (.635 cm) to take apart the valve (F . 2). At the end of the product’s useful life, dismantle and recycle it in a responsible manner. 1. - Page 5 Models and Replacement Parts Models and Replacement Parts Part Description 120581 1 npt. 4-Way Evacuation Valve 120601 1 1/2 npt. 4-Way Evacuation Valve 114054 O-Ring, fluorocarbon 188555 O-Ring, fluorocarbon Note: Replacing the o-ring requires an adjustable pin spanner wrench with a pin diameter of 1/4 in. (.635 cm).
- Page 6 Dimensions Dimensions Mounting Holes 2.5 in. (6.35 cm) (4X .312-18 UNC-28 R. 0.75) (Ø 4.33) 0.25 in. ( 0.635 cm) 2.5 in. (6.35 cm) 1.25 in. (3.18 cm) 2.165 in. (5.5 cm) 311881F...
-
Page 7: Technical Specifications
Technical Specifications Technical Specifications Four-Way Evacuation Valve U.S. Metric Maximum fluid working pressure 200 psi 1.38 MPa, 13.8 bar Dimensions 4.33 in. (w) x 4.95 in. (h) 11 cm (w) x 12.57 cm (h) Weight 3.5 lbs 1.58 kg Threads 1 and 1.5 npt(f) Fluid outlet size 5/16 unc(f) -
Page 8: Graco Standard Warranty
With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.