Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Assistech BASIC 2.0
- Page 1 Operation Manual Mobile Stand BASIC 2.0...
-
Page 2: Table Of Contents
Disposal .............................. 7 Assembly of the product ........................7 Product life ............................13 Warranty ............................13 Exclusion from warranty ........................ 13 Explanation of symbols on the product ..................14 Page 1 of 14 VERSION 2_01.10.2021 © AssisTech Sp. z o.o. 2021... -
Page 3: Product Description
OPERATION MANUAL OF THE MEDICAL DEVICE Mobile Stand REF BASIC 2.0 1. Product description The specialized BASIC 2.0 stand allows a convenient positioning of C-Eye , C-Eye II COM, ® ® C-Eye II PRO and mediContact products relative to the patient. This allows the patient, without ®... -
Page 4: Contents Of The Package
C - Longer mast section G - Smaller allen wrench D - Arm mountings H - Clamping ring for the arm The packaging can be reused or recycled. Page 3 of 14 VERSION 2_01.10.2021 © AssisTech Sp. z o.o. 2021... -
Page 5: Indications For Use
Page 4 of 14 VERSION 2_01.10.2021 © AssisTech Sp. z o.o. 2021... -
Page 6: Contraindications
9. Cleaning and disinfection The product should be cleaned with a soft dry cloth. Page 5 of 14 VERSION 2_01.10.2021 © AssisTech Sp. z o.o. 2021... -
Page 7: Working, Storage And Transport Conditions
It is forbidden to stand on the stand during operation, storage and transport of the kit between rooms. 11. Technical data Weight: 10 kg Maximum load: 8 kg Operating temperature: room temperature Page 6 of 14 VERSION 2_01.10.2021 © AssisTech Sp. z o.o. 2021... -
Page 8: Disposal
The clamping knobs on the mast should be on the same side as the base. You can adjust the mast height by tightening or loosening the knobs. Page 7 of 14 VERSION 2_01.10.2021 © AssisTech Sp. z o.o. 2021... - Page 9 You can adjust the height of the mast by tightening or loosening the knobs. Page 8 of 14 VERSION 2_01.10.2021 © AssisTech Sp. z o.o. 2021...
- Page 10 Failure to do so may result in the tripod tipping over, which may have negative consequences for the patient who works with the system as well as for the device itself. Page 9 of 14 VERSION 2_01.10.2021 © AssisTech Sp. z o.o. 2021...
- Page 11 (H) and tighten with the smaller allen wrench (G) if necessary. After the assembly, the stand should look as in the figure below. Make sure the knobs on the mast are tightened securely before use. Page 10 of 14 VERSION 2_01.10.2021 © AssisTech Sp. z o.o. 2021...
- Page 12 (F) and turn the bolt on the boom arm elbow in the "+" or "-" direction, respectively. 2) If the arm head bends under the device weight, tighten the bolts in its area using the larger allen wrench (F). Page 11 of 14 VERSION 2_01.10.2021 © AssisTech Sp. z o.o. 2021...
- Page 13 To install the device on the arm, fasten it with four screws as shown in the figure below. Use only the supplied screws. Screws that are too long can damage the computing unit. Page 12 of 14 VERSION 2_01.10.2021 © AssisTech Sp. z o.o. 2021...
-
Page 14: Product Life
use of spare parts other than original spare parts, mechanical damage caused by using the product with excessive load. Page 13 of 14 VERSION 2_01.10.2021 © AssisTech Sp. z o.o. 2021... -
Page 15: Explanation Of Symbols On The Product
REF BASIC 2.0 17. Explanation of symbols on the product Symbol Explanation Name and type of medical device : Mobile Stand REF BASIC 2.0 Product serial number Medical device manufacturer's symbol: AssisTech Sp. z o.o. ul. Trzy Lipy 3, 80-172 Gdańsk, Poland Don't throw it in the trash.
Need help?
Do you have a question about the BASIC 2.0 and is the answer not in the manual?
Questions and answers