Beko B5RDNE594ZXB User Manual page 16

Using the product
1. Compartment Conversion Key
Pressing compartment conversion key (
3 seconds, the freezer section switches between
cooler, off and freezer modes. If it is operated
as the cooler compartment, the temperature is
set to 4 Celcius degrees. In case of OFF mode,
compartment temperature indicator shall display
"- -".
2. Cooling Compartment Temperature Setting
Key
Allows setting of temperature for cooler
compartment. Pressing this key will enable the
cooling compartment temperature to be set at
8,7,6,5,4,3,2 and 1 Celcius.
3. Energy Saving (Display Off) Indicator
Energy saving function is enabled automatically
and the energy saving symbol () is displayed when
the door of the product is not opened or closed
for some period of time. When the energy saving
function is active, all symbols on the screen other
than the energy saving symbol shall be turned off.
When the energy-saving function is active, pressing
any key or opening the door will deactivate the
energy-saving function and the display signals
will return to normal. The energy-saving function
is a function activated ex-factory and cannot be
cancelled.
4. Fault Condition Indicator
This indicator ( ) shall be active when your
refrigerator cannot perform adequate cooling or in
case of any sensor error. "E" shall be displayed on
the Freezing Compartment temperature indicator
and figures such as 1,2,3... shall be displayed on
the cooling compartment temperature indicator.
These figures provide information to the authorized
service on the error that has occurred.
Exclamation mark may be displayed when you load
warm food to the freezing compartment or keep the
door open for a long period of time. This is not a
fault, this warning shall be removed when the food
is cooled down or when any key is pressed.
Refrigerator / User Guide
5.Quick Freeze Key
When the quick freeze key is pressed, the quick
) for
freeze symbol (
quick freeze function shall be activated. Freezing
compartment temperature is set to -27 Celcius.
Press the key again to cancel function. The quick
freezing function shall be automatically cancelled
after 52 hours. To freeze a large amount of fresh
food, press the quick freeze key before placing the
food in the freezer compartment.
*Handle Light Function Setting Key
Handle light function might be switched between
open and closed modes by pressing quick
freezing button (
mode, the handle light is only activated when the
appliance door is opened and it goes out after a
while after the door is closed. In the open mode,
the handle light is activated when the appliance
door is opened, the handle light stays on dimly
after a while after the door is closed. The handle
light function is set to the ex-factory closed mode.
6. Wireless Key
This key is used for establishing wireless
connection to your appliance through HomeWhiz
mobile application.
When you press the key for 3 seconds, the
wireless connection symbol on the display/screen
flashes slowly (with intervals of 0.5 seconds). This
introduces your home network to the appliance.
When wireless connection with the product is
established, LED on the key remains still.
Connection may be activated/deactivated by
pressing on this key following the completion
of initial setup. The wireless connection icon
flashes (with the interval of 0,2 seconds) until the
connection is established. When the connection is
active, LED will remain still.
In case the connection cannot be established for
a long time, check your connection settings and
refer to 'Troubleshooting' section in the manual.
HomeWhiz application shall be used for wireless
connection. Installation steps are described on the
application during installation.
15 / 31EN
) shall be illuminated and the
) for 3 seconds. In the closed