Related Manuals for CalAmp LMU 2630MB
Summary of Contents for CalAmp LMU 2630MB
- Page 1 LMU Controller Installation Guide For LMU Model 2630MB (VLP-LMUE1Y1) © Safe Fleet | May 2022 | All rights reserved | Part #: 700-1284 R1...
- Page 2 — THIS PAGE LEFT INTENTIONALLY BLANK — © Safe Fleet | May 2022 | All rights reserved | Part #: 700-1284 R1...
-
Page 3: Table Of Contents
LMU Controller Table of Contents Overview............4 Kit Contents. -
Page 4: Overview
Overview Overview Use this guide to install and set up the Location Messaging Units LMU 2630MB (VLP-LMUE1Y1). The LMU Controller provides vehicle tracking to view in AVL GPS Tracking (a.k.a. vMax Live+ 5.0) for users on AT&T, T-Mobile, Verizon, Telus, Bell and Rogers cell networks. -
Page 5: Installation
LMU Controller Installation Installation Complete Installation Record 1. From Safe Fleet or the customer, the installer gets an Installation Record (see sample below) with the Device ID column populated. The Device ID is the 10 digit ESN number on the LMU Controller label. -
Page 6: Install Lmu Controller
LMU Controller Installation Install LMU Controller 1. Select an LMU Controller modem installation location that meets the following requirements: CAUTION: Installation Requirements • The LMU Controller must be installed within the range of the cables distance. • Install within the vehicle, close to the DVR if possible. •... - Page 7 LMU Controller Installation The connection between the LMU Controller and the video recorder is different depending on which type of device you have installed in the vehicle. The following diagrams will help you set up three different systems with different components: LMU Controller Connections LMU Controller Connection for Video Recorders with 2x2 pin GPS Socket Typical System Setup for DVR with 2x2 GPS Socket...
- Page 8 LMU Controller Installation LMU Controller Connections LMU Connection Retrofit Setup for Previously Installed Video Recorders Without 2x2 pin GPS Socket Retrofit System Setup LMU Controller VLP-LMU26M LMU Controller Pin 20 Pin 20 Pin 11 Pin 11 Alarm Button / Extension Cable Pin 10 Pin 10 Pin 1...
- Page 9 LMU Controller Installation LMU Connection for New Installation of Video Recorders without 2x2 pin GPS Socket LMU Controller Connections New Installation System Setup LMU Controller VLP-LMU26M LMU Controller Pin 20 Pin 20 Pin 11 Pin 11 Alarm Button / Extension Cable ...
-
Page 10: Lmu Controller Leds
LMU Controller LMU Controller LEDs (Install LMU Controller continued) IMPORTANT If the DVR has a GPS4 unit installed, the GPS4 unit can be removed. The LMU Controller replaces GPS4 functionality on the DVR. IMPORTANT If you are replacing an LMU27, you can keep the same harnesses as long as the length allows the new LMU to be installed on the dash with its label facing the sky. -
Page 11: Provisioning The Lmu Controller
LMU Controller Provisioning the LMU Controller Provisioning the LMU Controller Once the controller has been physically installed in the vehicle, proceed to the Safe Fleet online tutorial that explains how to use the AVL GPS Tracking application (a.k.a. vMax Live+) to provision the LMU. To access the Provisioning LMU tutorial, click here. -
Page 12: Specifications
LMU Controller Specifications Specifications IMPORTANT: Specifications are subject to change without notice. System Information LMU 26 LMU 27 Cellular CDMA (Sprint/Verizon) 56 channel (with SBAS, WAAS, EGNOS, MSAS, 50 channel (with SBAS, DGPS) GPS Receiver GAGAN) GPS Receiver 2m CEP (with SA off) 2m CEP -160 dBm tracking sensitivity -162 dBm tracking sensitivity... -
Page 13: Appendix
LMU Controller Appendix Appendix Contact Support Technical Support: 1-844.899.7366 Email: PTsupport@safefleet.net Product Information For product information and documentation, please visit https://community.safefleet.net/ Please contact Technical Support if you do not have access credentials. Warranty And End-User License Agreement Complete warranty details are available at http://www.seon.com/documents/Seon-Warranty.pdf p.