Table of Contents
Advertisement
Troubleshooting
If the product cannot charge or power other devices, please check according to
following the steps:
·
Make sure the output port is on and the LED indicator above the power button
lights up in red.
·
Please check the remaining power indicator on the LCD.
If it is at 20% or below, please recharge the product as soon as possible.
·
Please check your electronic device's required power to see whether it exceeds
the maximum output power of the product.
·
Please check your electronic device connection to see whether it is well
connected.
·
If the screen cannot display well, such as blank or with garbled code, please
long press the power button for about 3 seconds to reboot.
Note: If there are some problems with your Discover 2000, please contact us
at service@nurzviy.com
Storage and Maintenance
·
Full charge the unit before storage and switch off all power buttons.
·
Keep it in a cool, dry place for long-term storage. Temperature within -40~140℉
(-40~60℃)，avoid direct sunlight.
·
Keep the battery laid flat during use, charging and store.
·
Clean the unit with a dry cloth gently and carefully.
·
DO NOT stack anything on top of the unit either in storage or in use.
·
Full charge the unit at least once every 3 months.
11
Advertisement
Table of Contents
