Advertisement
Quick Links
This device complies with Part 18 of the FCC Rules.
This product may cause interference to radio equipment and should not be installed near
maritime safety communications equipment or other critical navigation or communication
equipment operating between 0.45 -30 MHz. A simple measure to correct interference
is to add ferrites to the ends of lengths of communication cables.
Scan for the most up-to-date instructions.
Manufactured for Hawthorne Hydroponics LLC,
a subsidiary of The Hawthorne Gardening Company,
800 Port Washington Blvd, Port Washtington, NY 11050
HawthorneGC.com | Canada:HawthorneGC.ca
©2022. World rights reserved.
titancontrols.net
220816at
Steve Turmell
HGC702000-01_LB20136_TitanControls_Tali3in1SensorVPD_Instructions_220816.ai
Titan Controls Tali 3 in 1 Sensor VPD (Standard) 12 - Instruction Guide
SKU #:
HGC702000-01
Insert/Lea et
Component #:
LB20136
125g Copper Paper
131925
PT_120mm x 175mm
Katie Winkler
OBF Project #:
Wave:
UPC #:
849969000689
OBF Job #:
UPC SIZE:
THIS PAGE PRINTS AT 00% REDUCTION OF THE ORIGINAL LABEL TO FIT ON 11" x 17" PAGE
LB20136
Version 2
08/17/2022
175 x 120
UPC BW:
-
TALI
3-IN-1 VPD SENSOR
Product #HGC702000
Instruction Manual
ATTENTION INSTALLING PERSONNEL
Prior to installation, thoroughly familiarize yourself with this Installation Manual.
Observe all safety warnings. During installation or repair, caution is to be observed.
It is your responsibility to install the product safely and to educate the customer on its safe use.
RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.
CE SYMBOLE DÉNOTE UNE MESURE DE PRÉCAUTION.
Wuhan Ruibo Hengxing Paper Packing
Co. , Ltd., Wuhan, HUBEI PROVINCE
Black
Magenta
2
Cyan
Yellow
TM
MC
TM
MC
titancontrols.net
O set
Die
32
000
000
000
6
4
Advertisement
Summary of Contents for Hawthorne Titan Controls Tali HGC702000
- Page 1 Manufactured for Hawthorne Hydroponics LLC, It is your responsibility to install the product safely and to educate the customer on its safe use. a subsidiary of The Hawthorne Gardening Company, 800 Port Washington Blvd, Port Washtington, NY 11050 RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.
-
Page 2: Installation
Tali 3-in-1 VPD Sensor – Overview Installation 1. Install sensor(s) into desired positions following the recommended method (see Thank you for purchasing the Titan Controls Tali 3-in-1 VPD sensor. installation method) Before use, please check if the HGC702000-VPD sensor is in good condition. 2. -
Page 3: Product Appearance
Product Appearance In Box Connection interface VPD Sensor 2" LCD Screen wake button T-connector 82.3 mm 54 mm Front Side 2X Cables Top of Interface O set Steve Turmell Wuhan Ruibo Hengxing Paper Packing Co. , Ltd., Wuhan, HUBEI PROVINCE HGC702000-01_LB20136_TitanControls_Tali3in1SensorVPD_Instructions_220816.ai Black Magenta... -
Page 4: Connection Interface
Connection Interface Product Parameter Connection interface Performance parameter Power ≤0.8W Power supply 6 - 24V DC Operation temperature range 32° F - 122° F ≤95%RH Operation humidity range Min time interval for data < 8 S reporting Interface protocol CANbus Communication rate 50Kbps UL61010-1 CSA... - Page 5 Installation Method And Connecting To EL3 Notes Up to 16 Tali VPD sensors can be connected to the Gavita EL3. The Titan Controls Tali 3-in-1 VPD sensor needs to be used in a ventilated environment, and the installation position is as shown in the figure. Failure to follow the recommended positioning may result in nonoptimal readings.
-
Page 6: Warranty Information
If after reviewing the troubleshooting tips the unit will still not work, you should return it to the When purchased from an authorized Hawthorne dealer, this product is covered by a Dealer where you purchased it. They will be able to further evaluate the unit, test various LIMITED WARRANTY available at: hawthornegc.com/warranties.