Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Jameson Manuals
  4. Tools
  5. 16-14-600-GL
  6. Operation and safety instruction manual

Jameson 16-14-600-GL Operation And Safety Instruction Manual

Electrofusion insertion tapping tee
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Part Number: 16-14-600-GL
Jacket
Core
1/4" OD Rod
The foregoing instructions are provided by Jameson LLC to give guidance regarding the use of its gas line tracer products.
Jameson LLC cannot be responsible for any use of its products that does not comply with these instructions. However, you
are also cautioned to comply with all instructions, regulations and requirements provide by the owner of the property and of
the gas line, whether a utility company, governmental body or otherwise. You must also conform to and comply with all of
your employer's requirements. To the extent of any questions or any conflicts between instructions from Jameson and from
anyone else, please consult your supervisor as to the proper course of action.
Wire
WWW.JAMESONLLC.COM
OPERATION AND SAFETY
INSTRUCTION MANUAL
DISCLAIMER
800.346.1956
Electrofusion Insertion
Tapping Tee
(Sold Separately)
Patent Pending
General Information
The Live Tracer is used to trace the
path of live non-metallic gas mains.
The kit utilizes a traceable fiber-
glass rodder and a stuffing box to
enable tracing while maintaining
no blow by.
Use with custom insertion tap tee
for entry into gas mains. Use any
transmitter and receiver to trace
gas main from above ground.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 16-14-600-GL and is the answer not in the manual?

Questions and answers

Related Manuals for Jameson 16-14-600-GL

Summary of Contents for Jameson 16-14-600-GL

  • Page 1 DISCLAIMER The foregoing instructions are provided by Jameson LLC to give guidance regarding the use of its gas line tracer products. Jameson LLC cannot be responsible for any use of its products that does not comply with these instructions. However, you are also cautioned to comply with all instructions, regulations and requirements provide by the owner of the property and of the gas line, whether a utility company, governmental body or otherwise.
  • Page 2 The use of these components individually or in ment. combination with other non-Jameson tools or accessories is not recommended and will not Failure to follow instructions could result in an guarantee the safety or effectiveness of the accident causing serious injury.
  • Page 3 This publication was written to assist in the training of personnel in the appropriate procedures and operating tech- niques for joining polyethylene pipe with the Jameson Insertion Tee. This manual is designed as a training and instal- lation guide and should be used solely for this purpose. Permanent field installation should be done only by properly trained operators who have been certified in accordance with the requirements of the Department of Transportation.
  • Page 4 Installation of Insertion Tee (continued) 8. Make sure to check Insertion Tee fusion time and cooling time with reading on processor. If readings match, start fusion. If not, refer to instruction manual furnished by manufacturer of processor. 9. After fusion is complete, Clamping Device should remain in place during the recommended cooling time.

  • Page 5: Before Each Use

    Live Tracer Operation Before Each Use: Inspect O-ring for any sign of tearing, cracking or pitting. Replace if damaged BEFORE EVERY USE. Jameson O-rings are custom designed. Only Jameson-provided O-rings will guarantee proper safety and effectiveness. Inspect rod for damage. If rod surface is broken, replace rod. A scratched rod could cause leaking when scratch passes through Stuffing Box O-ring.
  • Page 6 24. Use squeeze tool to crimp 1” PE access pipe. Cap pipe per company procedures. NOTE The Jameson traceable rodder has a copper wire that can be inserted underground. Jameson cannot guarantee successful tracing for every make and model transmitter under all soil and moisture conditions.
  • Page 7 ATTACHING NEW END FERRULE Warning Read manufacturer’s instructions before using adhesive. In case of eye contact, flush with water and seek medical attention If skin contact occurs, apply solvent (such as nail polish remover) to area and gently remove adhesive. Wash solvent off with water. Sol- vents should not be used in case of contact with eyes or open wounds.

  • Page 8: Cooling Time

    Warranty Jameson products carry a warranty against any defect in material and workmanship for a period of one year from date of shipment unless failure is due to misuse or improper application. Jameson shall in no event be responsible or liable for modifications, alterations, misapplications or repairs made to its products by purchaser or others.