Summary of Contents for Idaho Jones Pump-A-Collect
Page 1
User Guide Pump-A-Collect 2x24mm Cups Hands-Free, Wearable, Silicone Collection Cups 17, 19, 21, and 27mm attachments are sold separately...
Page 2
Hands-Free, Wearable, Silicone Collection Cups Pump wherever and whenever you want, discreetly and comfortably. Our goal with our Pump-A-Collect cups is to empower you further in your pumping journey. Instead of having flanges and bottles sticking out of your bra, you can now pop down your shirt and enjoy pumping with hands-free-dom and graceful discretion.
Table of Contents What’s in the Box Cleaning How to Assemble Correct Placement Position for Expressing Disconnecting and Storing Milk Compatible Pumps Inserting the Tubing Into the Pump Inserting the Tubing Into the Pump-A-Collect Collection Cups Troubleshooting Replacing your Pump-A-Collect Parts...
Page 4
Important Information PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING YOUR PUMP-A-COLLECT CUPS FOR THE FIRST TIME. • Wash your hands with soap and water and dry thoroughly before assembling parts. • Ensure all parts are clean and dry before each use.
What’s in the Box: 2x Membrane caps 2x Valve bases 2x Membranes 2 Collection cups (6Oz/180ml) 2x Valves 2x Silicone breast shields / flanges 2x 24mm *Breast pump and tubing not included **27mm flanges and 17mm, 19mm, 21mm inserts are sold separately...
Cleaning BEFORE FIRST USE • Disassemble all parts. • Wash in warm soapy water. • Rinse well with clean water. • Submerge all parts, EXCEPT FOR THE WHITE MEMBRANE CAPS, in a pot of water and boil for no longer than 3 minutes. •...
Correct Placement PLACEMENT IN BRA IDEAL BRA FIT Correct nipple alignment and a supportive bra that keeps the cups securely in place will ensure your pumping sessions are comfortable and effective. Double check that you have a good seal between the flange and your skin.
Disconnecting and Storing Milk DISCONNECTING AND STORING MILK Remove your membrane caps or tubing from the cups. Carefully remove the cups from your bra and place them on a flat, firm surface until you’re ready to transfer your milk. Pour the milk out of the dedicated hole at the top of the collection cups.
Insert the tubing PUMP into your pump as per your pump’s instruction manual. TUBE Inserting the Tubing Into the Pump-A-Collect Collection Cups You need to insert your tubing into the ports on membrane caps very firmly. TUBE PUMP The tubing must go all the way down in the allocated gap in the ports on the membrane caps.
Page 14
Inserting the Tubing Into the Pump-A-Collect Collection Cups TUBING WITHOUT ANY ADAPTERS If your pump’s tubing doesn’t have any adapters (e.g. Spectra S1, S2, 9 Plus, Lansinoh, Ardo Calypso), simply insert the tubing firmly in the membrane cap as far down as possible. You may find twisting and pushing might enable you to push the tubing further down into the membrane cap.
Page 15
Inserting the Tubing Into the Pump-A-Collect Collection Cups TUBING WITH REMOVABLE ADAPTERS If the adapter can be removed (e.g. Baby Buddha, Pumpables SuperGenie, Bella Baby), remove it. And then insert the tubing into the ports on the membrane caps. If you have trouble inserting your tubing, use Tubing Adapter A.
Page 16
Inserting the Tubing Into the Pump-A-Collect Collection Cups TUBING WITH NON-REMOVABLE ADAPTERS If the adapter CANNOT be removed (e.g. Medela Pump In Style Advance, Pump In Style with MaxFlow, Freestle Flex, Swing), use Tubing Adapters A + B. TUBING ADAPTER A...
Troubleshooting ISSUE SOLUTION Ensure the tubing, the silicone membranes, and membrane caps are dry before use. If condensation occurs, ensure tubing is Condensation dry before next use: Disconnect the tubing in tubing from cups and turn the pump back on to dry the tubing while you are storing your breastmilk.
Page 18
Nipple Pain or Discomfort Ensure you are using well-fitted breast shields for both breasts. Lubricate breast shields with a thin layer of coconut oil if necessary. DO NOT continue using your Pump-A-Collect Cups if you experience pain or discomfort while pumping.
Replacing Your Pump-A-Collect Parts VALVES MEMBRANES Replace every 1-3 months depending on frequency of use. To get the most out of your parts: • Do not steam sterilize or boil after first use. • Do not wash them in the dishwasher.
Page 20
COMPLETE FREEDOM TO PUMP ANYWHERE ANYTIME! @idaho-jones www.idaho-jones.com...