Page 2
(C) Side Rail (One with Warning Label attached) (2 pcs) Assembly Hardware Set (D) Curved Base Rail (2 pcs) (I ) 18mm Screw (G)50mm Screw (H) Wood Pin (20 pcs) (4 pcs) (8 pcs) (E) Dowel Cross Rail (4 pcs) (A) Leg (B) Leg (2 pcs)
Page 3
Attach the Curved Base Rail (D) to the leg assembly with four 50 m m Screws ( G) as s hown. Ensure screws a re t ightened securely. Repeat for other side. Insert one of the end of the Dowel Cross Rails (E) into the large hole on the side assembly. The dowel should go into the hole tightly as shown in 4a.