Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for WAHL&ROSS DETAILS
- Page 1 Hand Sanitising Dispenser Instruction Manual...
-
Page 2: Important Safeguards
Thank You! We at Details by Wahl&Ross would like to thank you for your purchase! We hope that you will love and look after your product. Should you need help with your product or do you require spare parts please contact us. customercare@details.dk... -
Page 3: Care Instructions
1. In The Box • Dispenser housing • refillable bottle • driptray • battery door • security screws • wall mount bracket • 2x Hex bits Not Included • 4x AA batteries • liquid hand sanitiser If wall mounting you will also need: •... - Page 4 3. Setting Up Place dispenser on level surface and open cover. Note! The dispenser will turn off when the lid is open. 4. Remove the bottle...
- Page 5 5. Insert 4x AA Batteries with direction as shown below (Not included). 6. Screw on battery door...
- Page 6 7. Turn on & Dispensing Volume button Turn on: Push and hold until lights flash fast. Dispensing Volume Setting: Push to change dosage setting. 1 light = low dosage / 5 lights = high dosage 8. Adhesive Mounted (Glass, Tiles etc) Only mount on clean, smooth and even surfaces, do not mount on gaps or grout.
-
Page 7: Wall Mounting
9. Wall Mounting Create level marks on the wall using a spirit level. Level the backplate and mark the holes. Pre-drill and use wall plugs and screws appropriate to the wall. Screw backplate onto the wall. 10. Stand Mount (Stand Sold Seperately) Peel off sticker and mount backplate to stand aligning holes. - Page 8 11. Stand Assembly (Stand Sold Seperately) Align the pole with the hole in the plate. Insert provided screw and tighten with Allen key size 4.
- Page 9 12. Mount the product onto the backplate on the wall Position approx 1 cm above the backplate and push down gently. 13. Secure to backplate Insert provided screw to keep dispenser securely mounted to wall or stand...
- Page 10 14. Attach driptray by twisting 90° Clockwise 15. Insert screw to secure driptray.
- Page 11 16. Filling Place bottle on flat surface and remove lid. 17. Fill bottle with liquid hand sanitiser.
- Page 12 18. Securely fasten lid on refill bottle then press bottle down into dispenser pump. 19. Close front cover to power on and prime the pump. Test with hand until liquid is dispensed.
- Page 13 20. Top Up Bottles can be refilled or topped up in position. 21. Refill & Swap Bottles can be refilled remotely and replace the empty bottles.
- Page 14 Pro Tip* For fast bulk refill we recommend you set up a Refill Station Large numbers of bottles can be refilled ideal for hospitality, hotels and large businesses. For enquiries regarding custom refill stations please contact us hello@details.dk...
-
Page 15: Environmental Information
If you one day need to dispose of this product please do so in an environmentally friendly manner. Environmental Information “Electrical and electronic equipment (EEE) contains materials, components and substances that may be hazardous and present a risk to human health and the environment when waste electrical and electronic equipment (WEEE) is not handled correctly. - Page 16 Details by Wah&Ross Bygmarken 26 DK-3520 Farum customercare@details.dk Manufacturer: Wahl&Ross ApS Bygmarken 26 DK-3520 Farum Patent Pending Designed and Developed In Denmark Made in Denmark IB: D1-11-21...