Page 1 Z2 WIRELESS CONTROLLER Components Home Motion Assist Turbo Keymap RT Shift LT Shift...
Page 2 SWITCH Bluetooth Connection Pair 1. Turn on Switch, select “Controller”, “Change Grip/Order”. 2. Hold B and Home button for 2 seconds, the light breathes slowly in red. Release and wait. 3. Once succeed, the light stays red. Link / Wakeup General Link: Press Home button, if this console is the one been Bluetooth connected last time.
Page 3 WINDOWS APPLE DEVICES Bluetooth Connection Pair (Xbox mode) 1. Turn on Blueooth, select to add a device. 2. Hold X and Home button for 2 seconds, the light breathes slowly in blue. 3. Pair the device “Xbox Wireless Controller”. 4. Once succeed, the light stays blue. Pair (Switch mode) 1.
Page 4 GENERAL Pair & Link 1. Pair only at the ﬁrst time sync with the device. Thereafter, just link. 2. Only the latest paired device info of each mode (Switch, Xbox and Android mode) be saved. If ever paired with another device at the same mode thereafter, pair again. 3.
Page 5 ADVANCED Turbo Setting 1. Press Turbo button, together with the chosen button to enable Turbo. Turbo Please repeat the same operation to set for more buttons. Once done, LED turns on. Press the button to activate (keep being hit at the set speed), and release to stop. 2.
Page 6 ADVANCED Keymap General Operation Press to activate. If mapping exists in any of M1-4 buttons, both lights stay blue, the button behaves the same as the mapped one. Press again to disable. Mapping 1. Press Keymap button for 2 seconds, till the left light blinks red. 2.
Page 7 ADVANCED Motion Assist When motion assist function is on, gyro sensor works as the right thumbstick, so to take advantage of motion control in games not natively support. The right thumbstick works as normal at the same time. Global Motion Assist Press to activate.
Page 8 ADVANCED Calibrate Sticks 1. When the controller is off, hold Turbo button and + button, together with Home button. The left and right lights blink in turn. 2. Rotate the thumbstick for several rounds. 3. Press - button to end and save. Calibrate Triggers 1.