DECLARATION OF CONFORMITY We, declare under sole responsibility that our models (SP800/800C and SP1000/1000C) to which this declaration relates are in conformity with the following standards : EMC : EN 55014 - 1:2006,EN 55014-2:1997+A1:2001 Electromagnetic Compatibility: emission requirement EN 61000 - 3 - 2:2006,EN 61000-3-3:1995+A1:2001+A2:2005 Electromagnetic Compatibility: emission requirement.
Suntec SP Series Swimming Pool Dehumidifiers are well used in swimming pools, sauna rooms, museums, art galleries, storage, archives, etc. They reduce the condensation on the windows, walls or other parts of the building in enclosed structural environments, which prevents mould, corrosion, rot of the building.
Page 4
dehumidifier and whether the accessories are complete as stated on the following included accessories. If severe damage has occurred, please contact your supplier immediately and do not attempt to install dehumidifier unit. Included Accessories per unit Accessories Accessory Name Description Wall Mounted Used...
You can also find out the external dimension of your dehumidifier from the following diagram. Installing your dehumidifier How to install the dehumidifier on the wheels? Step 1: Lift up the dehumidifier and let it sit on the wooden box as show on figure below. Step 2: Take out the wheels from the accessory bag and screw those wheels into the screw thread on the base.
Page 6
How to install the dehumidifier on the ground? Step 1: Lift up the dehumidifier and let it sit on the wooden box as show on figure below. Step 2: Take out the floor mounted brackets from the accessory bag and screw those brackets into the screw thread on the base.
Keep it away from anything that could prevent airflow into and out of the unit. CAUTION! Never operate the Suntec SP dehumidifiers at temperature above C. It could damage the machine. Operating Your Dehumidifier Place the dehumidifiers in upright position If the dehumidifier has been in a horizontal position for any time over a few minutes, you must set it upright (vertical) for 45 minutes before starting.
How to Use the Control Panel & Remote Control Control Panel Signal Receiver LCD Display “Down” Button “Up” Button Indication “Start/Stop” Button Light Remote Control “Start/Stop” Button “Up” Button “Down” Button...
Page 9
Indication Light: Status Colors Description The machine HASN’T been connected to the electric supply. The power cord plug HAS been connected to the wall socket. Green Machine has started dehumidification. LCD Display: DELAY BAR. Current Humidity Display Mode. It reads the current ambient air humidity.
Page 10
Touch Pad Keys: On/Off. Press the On/Off key to start or stop the dehumidification. After press the On/Off key, the machine starts and performs a compressor delay. The delay is up to a maximum of 180 seconds. (30 seconds delay for the first startup). The DELAY BAR flashes during this delay period.
Warranty Suntec warrants to the original purchaser that if within a period of 12 months from the date of purchase this equipment is found to be defective either in original materials or workmanship, other than that of fair wear and tear, the faulty part will be replaced free of charge upon presentation of the appropriate evidence, providing the unit is returned to the original supplier.
Specifications Model SP800/800C SD1000/1000C Water Removal 80L /per day 100L /per day (30° C/80%RH) 1° - 40° C 1° - 40° C Operating Temp. Range Operating Humidity. Range 40% RH up to 95% RH 40% RH up to 95% RH...
Need help?
Do you have a question about the SP800 and is the answer not in the manual?
Questions and answers