(including children) should use the pump under the supervision and guidance of people who can take charge of their safety. Icma SpA - Via Garavaglia, 4 - 20012 Cuggiono (MI) ITALY Tel: +39 02 97249134 - +39 02 97249135 - www.icmaspa.it - sales@icmaspa.it...
Compared with the conventional circulating pump, its energy consumption is very low. The minimum energy consumption of the pump can reach 5W. Icma SpA - Via Garavaglia, 4 - 20012 Cuggiono (MI) ITALY Tel: +39 02 97249134 - +39 02 97249135 - www.icmaspa.it - sales@icmaspa.it...
• During installation, the pump shaft must be in the horizontal position. 4.1 Position of Junction Box Icma SpA - Via Garavaglia, 4 - 20012 Cuggiono (MI) ITALY Tel: +39 02 97249134 - +39 02 97249135 - www.icmaspa.it - sales@icmaspa.it...
FI.S167.EN.C - 03/2023 ELECTRONIC CIRCULATOR FOR SOLAR THERMAL SYSTEMS - Art. S167 5. ELECTRICAL CONNECTION Icma SpA - Via Garavaglia, 4 - 20012 Cuggiono (MI) ITALY Tel: +39 02 97249134 - +39 02 97249135 - www.icmaspa.it - sales@icmaspa.it...
Page 10
If the indicator lamp on the control panel lights, it indicates that the power supply is switched on. Icma SpA - Via Garavaglia, 4 - 20012 Cuggiono (MI) ITALY Tel: +39 02 97249134 - +39 02 97249135 - www.icmaspa.it - sales@icmaspa.it...
The pump should be set according to system type Factory settings=AUTO (auto adaptation mode) Recommended and available settings of pump Icma SpA - Via Garavaglia, 4 - 20012 Cuggiono (MI) ITALY Tel: +39 02 97249134 - +39 02 97249135 - www.icmaspa.it - sales@icmaspa.it...
“Signal Ref” is a reference earthing, and it is not NOTE connected to protective earthing. Icma SpA - Via Garavaglia, 4 - 20012 Cuggiono (MI) ITALY Tel: +39 02 97249134 - +39 02 97249135 - www.icmaspa.it - sales@icmaspa.it...
This system is adaptive to the automatic switching of PWM and non-PWM mode. NOTE When there is PWM signal input, the system will enter PWM mode. Icma SpA - Via Garavaglia, 4 - 20012 Cuggiono (MI) ITALY Tel: +39 02 97249134 - +39 02 97249135 - www.icmaspa.it - sales@icmaspa.it...
The signal is also applicable to comparing velocity setting value and feedback. Icma SpA - Via Garavaglia, 4 - 20012 Cuggiono (MI) ITALY Tel: +39 02 97249134 - +39 02 97249135 - www.icmaspa.it - sales@icmaspa.it...
The pump settings depend on the type of bypass valve it is equipped with, i.e. manually-operated bypass valve or temperature-controlled bypass valve. Icma SpA - Via Garavaglia, 4 - 20012 Cuggiono (MI) ITALY Tel: +39 02 97249134 - +39 02 97249135 - www.icmaspa.it - sales@icmaspa.it...
Please refer to Chapter 7 The pump should not operate CAUTION without water 10.3 Gas-exhausting of heating system Icma SpA - Via Garavaglia, 4 - 20012 Cuggiono (MI) ITALY Tel: +39 02 97249134 - +39 02 97249135 - www.icmaspa.it - sales@icmaspa.it...
Set the pump to HS3 mode in a short time, then gas in the pump will be vented quickly. Icma SpA - Via Garavaglia, 4 - 20012 Cuggiono (MI) ITALY Tel: +39 02 97249134 - +39 02 97249135 - www.icmaspa.it - sales@icmaspa.it...
Motor steering Voltage (V) Insulation class Protection Lever Certification mark Frequency (Hz) Temperature grade Energy efficiency label Model Icma SpA - Via Garavaglia, 4 - 20012 Cuggiono (MI) ITALY Tel: +39 02 97249134 - +39 02 97249135 - www.icmaspa.it - sales@icmaspa.it...
In domestic hot water, it is recommended to keep the temperature of water below 65°C so as to reduce scaling. Icma SpA - Via Garavaglia, 4 - 20012 Cuggiono (MI) ITALY Tel: +39 02 97249134 - +39 02 97249135 - www.icmaspa.it - sales@icmaspa.it...
When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for disposal at least free of charge. Icma SpA - Via Garavaglia, 4 - 20012 Cuggiono (MI) ITALY Tel: +39 02 97249134 - +39 02 97249135 - www.icmaspa.it - sales@icmaspa.it...
Need help?
Do you have a question about the S167 and is the answer not in the manual?
Questions and answers