Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Renac Turbo L1 Series
- Page 1 Turbo L1 Series User Manual Turbo-L1-5.3...
-
Page 2: Table Of Contents
Content 1. About This Manual 1.1 Applicability 1.2 Target group 1.3 Symbols used 1.4 Designation in the Document 2. Safety 2.1 General Safety 2.2 Important safety instructions 2.3 Explanation of symbols 3. Introduction 3.1 Product Overview 3.2 Terminals 4. Technical data 5. -
Page 3: About This Manual
2.1 General Safety The Turbo L1 Series battery is for residential and works with a photovoltaic system. It is a high voltage Li-ion battery storage system, with the control module on itself. It could be operated in on-grid, off-grid and backup modes with compatible inverters. -
Page 4: Important Safety Instructions
firefighters to extinguish the fire. Damage to the battery system due to under voltages ◆ If the battery system doesn't start at all, please contact Renac after-sales service within 48 hours. Otherwise, the battery could be permanently damaged. -
Page 5: Terminals
The battery supports power and capacity expansion. 6pcs battery modules can be connected in parallel [1] Nominal Energy: 100% DOD 0.33C charge & discharge at +25℃ (test conditions). [2] Ambient temperature: charging (0 ~ +50℃), discharge (-10 ~ +50℃). [3] Condition apply: refer to Renac Power Battery Warranty Policy. Battery 1 Battery 2... -
Page 6: Installation
5.2 Check for transport damage 5.1 Unpacking Check if the Turbo L1 series battery has some visible external damage, such as cracks in the housing or display please contact with your dealer if you find any damage. The below table shows the components and mechanical parts that should be delivered. -
Page 7: Available Space
Turbo L1 Series User Manual Turbo L1 Series User Manual 5.4 Available space 5.5 Preparation The following tools shall be prepared before installation The space between the left and the right battery is a recommended distance. Keep the distance as short as you can if there is no Installation Tools influence to the operation. -
Page 8: Installation Steps
Turbo L1 Series User Manual Turbo L1 Series User Manual 5.6 Installation steps 5.6.1 Wall-mounted Installation steps 1. Mark the drilling position using the wall mounting plate and level using a spirit level. 2. Place the wall mounting plate close to the wall firmly, mark the drilling position and remove the wall mounting plate. -
Page 9: Parallel Battery Wiring Step
Turbo L1 Series User Manual Turbo L1 Series User Manual The wiring order of the communication cable is as follows: 5.7.1 Ground Cable Connection Notice: 1) White with an orange stripe 2) Orange Connect the Ground Cable first before installing the equipment. Disconnect the Ground Cable before dismantling the equipment. - Page 10 Turbo L1 Series User Manual Turbo L1 Series User Manual The wiring order of the communication cable is as follows: 5.8.1 Ground Cable Connection Notice: 1) White with an orange stripe 2) Orange Connect the Ground Cable first before installing the equipment. Disconnect the Ground Cable before dismantling the equipment.
-
Page 11: Commissioning
Turbo L1 Series Turbo L1 Series User Manual User Manual 5.8.5 Close the Cover 6.3 Power On After electrical connections are complete, check all the wiring are correctly and securely connected, ensure that the battery 1. Turn on the DC Isolator on the battery. -
Page 12: Decommissioning
Turbo L1 Series User Manual 7 Decommissioning 7.1 Dismantling the battery Turn off the DC Isolator on the battery. Make sure that the battery level indicator of the battery is off. Disconnect battery wiring. Disconnect communication and optional connection wiring.
Need help?
Do you have a question about the Turbo L1 Series and is the answer not in the manual?
Questions and answers