Product/Pic Product/Pic Product/Pic Product/Pic Product/Pic Product/Pic Product/Pic Product/Pic Thank you for choosing the RAM Wall Humidifier. Each unit has been manufactured to ensure safety and Product/Pic Product/Pic Product/Pic Product/Pic Product/Pic Product/Pic Instruction She reliability. Before using for the first time, please read the instructions carefully and keep for future reference.
Page 3
Water Drain Assembly (all 3/8” Push-fit fittings and Pipe): NOTE: the drain pipe should always run down or horizontally, at no point should it turn upwards or loop – this may prevent proper drainage or cause a siphon effect. 1. Connect the Outlet/Overflow Fitting to the marked OUT and OVERFLOW OVERFLOW threads, on the left side of the unit, as per diagram (OUT to Fitting with Valve, OVERFLOW to Fitting with NO Valve).
Page 4
Maintenance For all maintenance, disconnect the humidifier from the mains power. It is recommended to carry out the below maintenance every 3 to 6 months. Dust screen maintenance 1. To take off the front cover, lift the clips at the top and pull forward, then pull down to remove. 2.
Page 5
Check your local authority for IPX0 Input 220-240 V AC | 50 Hz Power 120 W Max. Output 1600 ml/hr RAM is a HydroGarden brand | HydroGarden Ltd., 2 Progress Way, Binley, Coventry, CV3 2NT, UK www.hydrogarden.com | Made in PRC...
Page 6
Conditioned environments since 1997 www.heronhill.co.uk...
Need help?
Do you have a question about the ram and is the answer not in the manual?
Questions and answers