TVLogic LUM-095G Operation Manual
  1. Manuals
  2. Brands
  3. TVLogic Manuals
  4. Measuring Instruments
  5. LUM-095G
  6. Operation manual

TVLogic LUM-095G Operation Manual

4k/uhd multi-purpose monitor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
LUM-095G
4K/UHD
Multi-Purpose Monitor
Operation manual_V1.1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LUM-095G and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for TVLogic LUM-095G

  • Page 1 LUM-095G 4K/UHD Multi-Purpose Monitor Operation manual_V1.1...
  • Page 2 FCC (Federal Communications Commission) This equipment has been tested and found to comply with the limits for class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interface when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

  • Page 3: Table Of Contents

    Contents Caution Main Features Controls & Functions Menu Tree & Adjustment Menu Operations [1] PICTURE [2] COLOR [3] MARKER [4] DISPLAY / VIDEO [5] WAVEFORM [6] AUDIO [7] SYSTEM / GPI / UMD Button Functions Other Functions Video Support Resolution Product Specifications...

  • Page 4: Caution

    01 CAUTION 4K/UHD Multi-Purpose Monitor • Make sure to connect the power supply of the • Do not attempt to service the product yourself. specified voltage value: DC 12V/24V MAX 2.3A. Removing covers can expose you to high voltage and other dangerous conditions. Request a •...
  • Page 5 01 CAUTION 4K/UHD Multi-Purpose Monitor • Do not use the product near water, such as bathtub, • The vents and other openings in the cabinet are washbasin, kitchen sink and laundry tub, designed for ventilation. Do not cover or block swimming pool and in a wet basement.

  • Page 6: Main Features

    • Integrated Camera LUT • Anamorphic: 1.3X, 1.5X, 1.8X - LUTs for every major camera manufacturers are • Luma(Y’) Zone Check integrated to the LUM-095G, and they can be • Range Error applied to the live input video. • Closed Caption: CC-608, CC-708 - Log-C, C-Log, S-Log1, S-Log2, S-Log3, RED •...

  • Page 7: Controls & Functions

    4K/UHD Multi-Purpose Monitor 03 CONTROLS & FUNCTIONS LUM-095G ALL PART (FRONT / REAR) TALLY CHROMA BRIGHT CONTRAST APERTURE VOLUME HDMI MENU SPEAKER-LEFT SPEAKER-RIGHT SCAN POWER ASPECT ENTER MARKER DOWN H/V DELAY BLUE/MONO W-FORM/VECTOR TALLY TALLY SDI-IN A/B REMOTE SDI-OUT C/D...
  • Page 8 4K/UHD Multi-Purpose Monitor 03 CONTROLS & FUNCTIONS FRONT • [SDI] Button/Lamp • [BLUE]/[MONO] Button/Lamp - Used to select SDI-A/B input. - Activates in the order of [Off ]-[Blue Only]- [Mono]-[Off ] • [HDMI] Button/Lamp - Press the button to remove red and green - Used to select HDMI input.
  • Page 9 4K/UHD Multi-Purpose Monitor 03 CONTROLS & FUNCTIONS FRONT • [MENU] Button • [TALLY] Lamp - Used to activate the OSD menu. - Tally lamp that can be toggled in green or - When the OSD menu is activated, press this red using the REMOTE(RJ-45) port or RS-422 button to exit from the menu.
  • Page 10 DC IN socket • [RS-422 IN/OUT] - Used for the control of the monitor with 1: GND protocol provided by TVLogic or for Dynamic 4: +12V/ UMD function by TSL protocol. +24V • [AUDIO IN] (Phone Jack) - Insert the external stereo audio signal.

  • Page 11: Menu Tree & Adjustment

    1. Press MENU button to activate the OSD menu. • This Picture is the menu structure for LUM-095G. 2. Move to a desired menu using the Knob. 3. Press the Knob to select a menu and move to select a sub-menu by scrolling the Knob.

  • Page 12: Menu Operations

    4K/UHD Multi-Purpose Monitor 05 MENU OPERATIONS [1] PICTURE • KNOB LOCK PICTURE 같이 LUM-095G - Locks the Knob control. BRIGHTNESS CONTRAST • 3DLUT LOAD CHROMA SHARPNESS - Used to apply the internally stored 3DLUT. PEAKING BOOST - Maximum 3 x 3DLUT files can be stored.
  • Page 13 4K/UHD Multi-Purpose Monitor 05 MENU OPERATIONS [2] COLOR • BLACK LEVEL COLOR같이 LUM-095G - The minimum black level of the video signal STANDARD can be set differently depending on the VIDEO RANGE LIMITED109 PEAK LUMINANCE performance of the monitor or the lighting BLACK LEVEL 0.001...
  • Page 14 4K/UHD Multi-Purpose Monitor 05 MENU OPERATIONS [2] COLOR • SG (System Gamma) COLOR같이 LUM-095G - The System Gamma of HLG is automatically STANDARD calculated and displayed according to the set VIDEO RANGE LIMITED109 PEAK LUMINANCE [PEAK LUMINANCE]. BLACK LEVEL 0.001...
  • Page 15 4K/UHD Multi-Purpose Monitor 05 MENU OPERATIONS [2] COLOR • COLOR COPY COLOR같이 LUM-095G - Used to copy the R/G/B Gain value of pre-stored COLOR TEMP 6500K color temperature settings. GAIN RED - In User mode, find and select the color...
  • Page 16 4K/UHD Multi-Purpose Monitor 05 MENU OPERATIONS [3] MARKER MARKER같이 LUM-095G ENABLE MARKER CENTER MARKER SAFETY AREA FIT MARKER MARKER : 4:3 MARKER : 4:3 MARKER MAT SAFETY AREA : 90% SAFETY AREA : 90% MARKER COLOR WHITE FIT MARKER : OFF...

  • Page 17: Display / Video 17P

    4K/UHD Multi-Purpose Monitor 05 MENU OPERATIONS [4] DISPLAY / VIDEO • BLUE ONLY VIDEO이 LUM-095G - Available modes are [OFF] [BLUE ONLY] [MONO]. SCAN ZERO SCAN - [BLUE ONLY] : Remove red and green components ASPECT AUTO from the input signal and display blue componet H/V DELAY only.
  • Page 18 4K/UHD Multi-Purpose Monitor 05 MENU OPERATIONS [4] DISPLAY / VIDEO VIDEO이 LUM-095G • ZOOM SPLIT SCAN ZERO SCAN - Used to magnify the image. ASPECT AUTO - Used to zoom the specified area sequentially. H/V DELAY - Designable areas are Left-Top, Right-Top, Left-...
  • Page 19 4K/UHD Multi-Purpose Monitor 05 MENU OPERATIONS [4] DISPLAY / VIDEO • FOCUS ASSIST VIDEO이 LUM-095G - Focus Assist helps the shooters to easily find DSLR SEL CANON 7D out the exact area in the picture with good focus, DSLR SCALE...
  • Page 20 4K/UHD Multi-Purpose Monitor 05 MENU OPERATIONS [5] WAVEFORM • SIZE WAVEFORM LUM-095G - Adjust the size of the Waveform or Vectorscope. ENABLE - Available options are [SMALL] and [LARGE]. TYPE * See section “7. Other Function [2] Waveform / INTENSITY Vectorscope“...
  • Page 21 4K/UHD Multi-Purpose Monitor 05 MENU OPERATIONS [5] WAVEFORM • Y MAX WAVEFORM LUM-095G - Used to set the maximum Luma(Y’) level from 0 ENABLE to 255. TYPE - Pixels with values exceeding the maximum INTENSITY luma(Y’) level blink on the screen, and are...
  • Page 22 4K/UHD Multi-Purpose Monitor 05 MENU OPERATIONS [6] AUDIO • LEVEL METER AUDIO LUM-095G - Used to set the Level Meter for the embedded VOLUME audio. Em. AUD LEFT CH 01 - Available options are : Em. AUD RIGHT CH 02 SDI Input : [Off]-[16CH(Hor.)]-[16CH(Ver.)]...

  • Page 23: System / Gpi / Umd 23P

    4K/UHD Multi-Purpose Monitor 05 MENU OPERATIONS [7] SYSTEM / GPI / UMD • ECO SAVING SYSTEM / GPI / UMD LUM-095G - Used to save power consumption automatically DEFAULT when there is no monitor signal. LUMINANCE + 100 - When the signal is supplied, the brightness of INTERNAL PAT the monitor will be changed to the set value.
  • Page 24 - Available setting is [0] to [98]. MARKER 4:3 ON AIR • MONITOR ID MARKER 1.85:1 - Sets the ID of each monitor for the TVLogic MARKER 2.35:1 control protocol or DYNAMIC UMD using MARKER 1.85:1 & 4:3 RS-422/485 communication.
  • Page 25 - The operation of sub menus varies depending on the settings in [UMD DISPLAY] • UMD ID *DEFAULT: Original TVLogic managing method - Sets the ID of the UMD. (VRT) - Available setting is [0] to [125]. *USER COLOR: The user can set each tally color.
  • Page 26 4K/UHD Multi-Purpose Monitor 05 MENU OPERATIONS [7] SYSTEM / GPI / UMD • UMD DISPLAY / • D-UMD TALLY TYPE SYSTEM / GPI / UMD LUM-095G UMD ID UMD DISPLAY UMD CHARACTER CHANNEL 1 UMD CHAR COLOR WHITE UMD B.G TRANS OPAQUE UMD B.G SIZE...
  • Page 27 4K/UHD Multi-Purpose Monitor 05 MENU OPERATIONS [7] SYSTEM / GPI / UMD <Dynamic UMD Protocol (TSL V3.1)> * Transmission (18 Byte) (PC or Device -> Monitor) HEADER CONTROL DISPLAY DATA (1 BYTE) BYTE(1 BYTE) (16 BYTE) * [HEADER] : Display address (0~126) + 80 hex. * [CONTROL BYTE] bit 0 : Tally 1 (1=on, 0=off) bit 1 : Tally 2 (1=on, 0=off)
  • Page 28 4K/UHD Multi-Purpose Monitor 05 MENU OPERATIONS [7] SYSTEM / GPI / UMD • Tally Type - Default - TSL_S8C(Single 8 Characters) & TSL_S16C(Single 16 Character) Bit 1 Bit 0 Operation (Tally2) (Tally1) CHANNEL1 CHANNEL1 CHANNEL1 CHANNEL1 - TSL_D8C(Dual 8 Character) Bit 3 Bit 2 Operation...

  • Page 29: Button Functions

    *Current Input Signal Format SDI QUAD HDMI • The LUM-095G has the four SDI inputs. 3840 x 2160 50p* 1. If you push [SDI] button, the input mode is changed in the order of SDI A, SDI B, SDI 2SI, *Current Input Signal Format SDI QUAD.
  • Page 30 06 BUTTON FUNCTIONS INPUT BUTTON SCAN BUTTON FUNCTION(F1/F2/F3) BUTTON • The LUM-095G supports the various SCAN modes • The Function bottons allow for making a quick setting on each button. 1. If you push [SCAN] button, the mode is changed in the order of ZERO SCAN →...

  • Page 31: Other Functions

    [1] 1 : 1 SCAN • The resolution of the LCD panel of the LUM-095G is 1920 x 1080. When the UHD(3840x2160), 4K(4096 x 2160), or SD image is fed, this function displays the image pixel to pixel on the screen.
  • Page 32 4K/UHD Multi-Purpose Monitor 07 OTHER FUNCTIONS [2] USER ASPECT • Used to adjust the Width /Height display ratio. 1. Select the [USER ASPECT] mode in the OSD menu or by pressing [SCAN] button on the front. 2. After the activation, press [UP] and [DOWN] buttons to adjust the aspect ratio. USER ASPECT WIDTH +1920 HEIGHT +1080...
  • Page 33 4K/UHD Multi-Purpose Monitor 07 OTHER FUNCTIONS [3] WAVEFORM / VECTORSCOPE • WAVEFORM Y - Displays the Luma(Y’) component of the input signal into waveform. • The Waveform/ Vectorscope function can be used only when the input signal is YUV. • In the case of RGB input, Waveform RGB is supported. •...
  • Page 34 4K/UHD Multi-Purpose Monitor 07 OTHER FUNCTIONS [4] LINE SELECT (WAVEFORM / VECTORSCOPE) • Used to select specific Vertical Line for WaveForm/VectorScope. - This is available when LINE WaveForm is activated. - To activate this feature, set [WAVEFORM] - [LINE WAVEFORM] - [ON], and select the desired horizontal line using [UP] and [DOWN] button in [SEL LINE POS].
  • Page 35 4K/UHD Multi-Purpose Monitor 07 OTHER FUNCTIONS [5] ZOOM • Used to magnify the input signal from 0% to 90%. • Supports Zoom Width Scroll / Zoom Height Scroll function. • Zooms IN/OUT focused on the scrolled area. ZOOM WIDTH HEIGHT <ZOOM OFF>...
  • Page 36 4K/UHD Multi-Purpose Monitor 07 OTHER FUNCTIONS [6] LUMA (Y') ZONE CHECK • COLOR PATTERN TYPE • ZEBRA PATTERN TYPE - Displays the pixels with the designated - Displays the pixels with the designated Luma(Y’) levels of the input image in colors. Luma(Y’) levels of the input image in zebra Pixels whose Y’...
  • Page 37 4K/UHD Multi-Purpose Monitor 07 OTHER FUNCTIONS [7] FOCUS ASSIST • Focus Assist function assigns a color on the pixels of the shape or boundary of the image, which helps the user easily see which part of the image is in focus or out of focus. - With this function, the user can easily differentiate the focused area from the out-focused area especially when shooting with a shallow depth of field.
  • Page 38 4K/UHD Multi-Purpose Monitor 07 OTHER FUNCTIONS [8] FIRMWARE UPGRADE • The USB (Thumb drive) which contains the F/W file is neened for Firmware Upgrade. • Select the S/W UPGRADE in the SYSTEM menu. 1. Connect the USB to the USB Slot on the bottom of the monitor. 2.

  • Page 39: Video Support Resolution 39P

    4K/UHD Multi-Purpose Monitor 08 VIDEO SUPPORT RESOLUTION - SDI Input Signal Signal Format Interfaces (SD-SDI) SD-SDI 720x487 (59.94i) YCbCr 4:2:2 10bit Single Link 720x576 (50i) Input Signal Signal Format Interfaces (HD-SDI) 1280x720 (50/59.94/60P) YCbCr 4:2:2 10bit 1920x1080 HD-SDI (23.98/24/25/29.97/30p) Single Link YCbCr 4:2:2 10bit (50/59.94/60I) (24/25/29.97/30psf )
  • Page 40 4K/UHD Multi-Purpose Monitor 08 VIDEO SUPPORT RESOLUTION - HDMI Input Signal Signal Format Interfaces (HDMI/DP) 480i(60) / 576i(50) 480p(60) / 576p(50) * HDMI 1280x720(50/59.94/60p) RGB 4:4:4 8bit 1920x1080(50/59.94/60p) YCbCr 4:4:4 8bit 1920x1080(23.98/24/25/29.97/30p, YCbCr 4:2:2 8bit 60i/59.94i/50i ) RGB 4:4:4 8bit / 10bit / 12bit HDMI 3840x2160 YCbCr 4:4:4 8bit / 10bit / 12bit...

  • Page 41: Product Specifications

    576i (50) 1 x REMOTE RJ-45 Input, GPI Control Remote Control 2 x RS-422 RJ-45 Input & Output, Control by TVLogic Protocol & Update 1 x USB USB A type, Firmware Upgrade Audio In Embedded Audio / Analog Stereo (Phone Jack)

Table of Contents