Lights LampLust Elloway Installation Instructions

INSTALLATION INSTRUCTIONS

IMPORTANT

Before using your LampLust Elloway Solar Lantern Wall Lights, please
make sure that you carefully read through these instruction sheets.
NOTE: The important safeguards and instructions that appear in this
manual are not meant to cover all possible conditions and situations that
may occur. It must be understood that common sense, caution and care
are factors that can't be built into any product. This approach must
be used by the person(s) caring for and operating the solar lights.

GENERAL INFORMATION

Battery installation should only be performed by an adult. Only batteries
of the same of equivalent type as recommended should be used. Battery
leakage can cause corrosion and damage to this product so please
remove non-functioning batteries immediately. Remove batteries from
product during long periods of non-use. DO NOT DISPOSE OF IN FIRE.
Please dispose at your local recycling facility.

STEP BY STEP INSTRUCTIONS

Before operating your solar lights, remove the battery tab from the
battery compartment (located inside the lantern, under the solar panel),
thereby activating the batteries.

WHAT WE PROVIDE

• 2 - Elloway Solar Lantern Wall Lights
• 2 - Wall Hooks
• 2 x AA LiFePo4 Rechargeable Batteries (Installed)
(1 Per Path Light)
• Mounting Hardware

CHOOSING THE RIGHT LOCATION

Before installing the solar lights, you will need to
select the right location for installation. The solar
lights need to be in a non-shaded area where
1
sunlight is not obstructed by buildings, walls, fences,
trees, bushes or any shadows that these objects
create throughout the day. Shady locations will not
allow the battery to fully charge and may reduce the
time the solar lights stay on. Avoid proximity to other
light sources, which may cause the solar lights to not
operate correctly. Make sure solar lights are placed at
least 6 feet apart to prevent light interference.
1
NO. LC005059