SECOMP 12.99.1105 User Manual

USB 3.2 Gen 1 to
Gigabit Ethernet Converter
12.99.1105
User Manual
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or adjusting
this product. Please keep this manual for future reference.

1.0 INTRODUCTION

The USB 3.0 to Gigabit Ethernet Adapter is a high performance and low-cost
solution. It enables Gigabit Ethernet network connection capability for desktops,
ultra book with standard USB port. It resolves the trouble of the computer without
Ethernet port that you can also connect computer to Ethernet through USB 3.0
port easily.

2.0 FEATURES

Single chip USB 3.0 to 10/100/1000M Gigabit Ethernet controller with Energy
Efficient Ethernet (EEE). Features as below:
 Integrates on-chip USB 3.0 PHY and controller compliant to USB Spec 3.0,
2.0 and 1.1
 Supports all USB 3.0 power saving modes (U0, U1, U2, and U3)
 Supports USB Super/High/Full Speed modes with Bus-power or Self-power
device auto-detect capability
 Supports IEEE 802.3az (Energy Efficient Ethernet)
 Supports parallel detection and automatic polarity correction
 Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce CPU
loading