Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for decon ADV5314
- Page 1 Assembly Instructions ADV5314, ADV5014 Adventus adapter bar R82 Kudu 2022-11 Revision 0...
-
Page 2: General Instructions
INFO Particularly important or explanatory information General instructions These instructions shall always be followed when placing the adaptor bar ADV5314 and ADV5014 on a wheelchair. Adjustment of the Adventus wheel is described in the user manual of the Adventus wheel. - Page 3 Assembly Instructions ADV5314, ADV5014 __________________________________________________________________________________ 2. Overview A Adapterbar B Fork adapterbar C Adaptor kit D QR Pin INFO Picture above shows the adaptor bar assembled on R82 Kudu Size4 with 22” wheels. __________________________________________________________________________________ Sida 3/9...
- Page 4 Assembly Instructions ADV5314, ADV5014 __________________________________________________________________________________ 3. Assembly adaptor kit First mount the Adaptor kit (C) on both sides of the frame. Mount the holders so that they still can be moved along the wheelchair chassis. __________________________________________________________________________________ Sida 4/9...
- Page 5 Assembly Instructions ADV5314, ADV5014 __________________________________________________________________________________ Mount the adaptorbar (A) into the holders and lock it into place using the QR Pins (D). Now tighten the screws sitting in the clamps that connects to the frame of the wheelchair. INFO After the screws are tightened check that the adaptor bar still can be removed from its holders without excessive force.
- Page 6 Assembly Instructions ADV5314, ADV5014 __________________________________________________________________________________ 4. Adjustment of the adaptor bar Mount the fork (B) onto the adaptor bar (A). Make sure that the fork (B) sits in the center of the wheelchair. Remove the screws in the fork (B) that locks the rotation (see picture bellow).
- Page 7 Assembly Instructions ADV5314, ADV5014 __________________________________________________________________________________ Mount the adjustment tool in the fork (B). Adjust the height and angle of the fork (B). The fork (B) must sit underneath the wheelchairs footrest. INFO Check that there is no interference between the fork (B) and the footrest.
- Page 8 10Nm for the one holding the fork (B). Also make sure that the fork is still centred and the angle of the adjustment tool is still correct. Check one last time that all screws are properly secured. Now see the user manual of Adventus to continue the installation. This can be downloaded from www.decon.se/en/ __________________________________________________________________________________ Sida 8/9...
- Page 9 Assembly Instructions ADV5314, ADV5014 __________________________________________________________________________________ Decon Wheel AB Södra Ekeryd 119, SE-314 93 Hyltebruk, Sweden Tel: +46 (0)345 40880 Fax: +46 (0)345 40895 E-mail: info@decon.se __________________________________________________________________________________ Sida 9/9...
Need help?
Do you have a question about the ADV5314 and is the answer not in the manual?
Questions and answers