The extremely high intensity will increase the temperature in the material. Using non RobLight harnesses in this light generator is at its own risk. Ensure that the polyconnector is undamaged and clean before using the light gener- ator in retrofit RobLight installations.
Technical data General Material Aluminium, POM and other Dimensions (L x H x W) Ø29 x 44 x 76 mm Weight (total) 60 g Safety CE, RoHS, WEEE, F Topology Serial connection Environmental Protection rating IP 20 Cooling Natural convection Ambient temperature 0°...
Connect driver and main power (100- 240V) Local dimming Ara 5 and 5+ Each head can be dimmed indivdually by pressing the button on the base of the fixture. Will change the state of the fixture. The fixtur can cycle betwen 3 states : Max intensity »...
Lens mounting Easily mount the lens by screwing io into the fixture When adjusting the 48°/8° lens use the narrow end of lens tool A (accessor) Dont touch the lens surface. Installing accessories You can mount a film filter using filter clip A (accessories). Dimension : Ø28*0.4 mm To ensure the most durable solution only use filters from recognized suppliers.
Page 6
Accessories Part name Description Ordering Lens A 10° black 1148 0100 Lens A 10° grey Spot 10 1148 0105 Lens A 10° white 1148 0106 Lens A 20° black 1148 0300 Lens A 20° grey Narrow 20 1148 0305 Lens A 20° white 1148 0306 Lens A 30°...
Remove dirt and dust from light gene- ing system. rator. If problems are not solved using this guide, please contact RobLight A/S. Maintenance, spare parts and repairs The cooling for this device is dependant that the metal surface is clean and free from dust.
Need help?
Do you have a question about the Ara 5 and is the answer not in the manual?
Questions and answers