Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Sami ST-1000 PTO
- Page 1 User’s manual Saltspreader ST-1000 PTO, ST-1250 PTO...
-
Page 2: Table Of Contents
INTRODUCTION Thank you for purchasing this attachment. We in AS SAMI hope that you will be satisfied with our product. This product is a result of AS SAMI’s long experience in the design and manufacturing of various attachments. We ask that you read and understand the contents of this manual completely before operating the attachment. -
Page 3: Intended Purpose And Working Principle
Model: ST-1000 PTO or ST-1250 PTO Serial no: ……………………………………….……..Seller: ……………………………………………..Seller address: …………………………………………………… Phone: ……………………………………………………. INTENDED PURPOSE AND WORKING PRINCIPLE The attachment must be used only for the purposes indicated herein. Area of application The salt spreaders are designed attaching to a tractors 3 point hitch. The PTO shaft is connected to the tractor’s PTO system. - Page 4 general aspects related to safety and use of the salt spreader which the operator should take into account. Carefully inspect the attachment, its couplings and controls and read the relevant instructions before use. Operator The attachment may be used only by a person who has read this Operator’s manual and is familiar with using the attachment.
-
Page 5: Technical Specifications
PYO shaft stops. The salt spreader may be used only with a base machine where the PTO can be activated only manually. Stop the spreader when leaving the base machine. TECHNICAL SPECIFICATIONS ST-1000 PTO ST-1250 PTO Fastening 3P (Cat. 1 and 0) -
Page 6: Maintenance Instruction
MAINTENANCE INSTRUCTION Greasing of bearings Grease the bearings daily, depending on the intensity of use of the spreader. Grease the bearings daily, depending on the intensity of use of the spreader. Grease the bearings daily, depending on the intensity of use of the spreader. See figure 1 and 2. - Page 7 Maintenance of chain and sprockets Maintenance of chain and sprockets The chain and sprockets in the chain compartment should be greased at least once per The chain and sprockets in the chain compartment should be greased at least once per The chain and sprockets in the chain compartment should be greased at least once per month of operation using an oil can.
-
Page 8: Gear Box Maintenance
Figure 4. Chain (B) tensioning by moving gear and chain wheel. Chain (B) tensioning by moving gear and chain wheel. Chain (B) tensioning by moving gear and chain wheel. Loose the Gera’s and bearing’s bolts. Move both in a way shown in figure 4. Fasten bolts Loose the Gera’s and bearing’s bolts. -
Page 9: Troubleshooting
WARRANTY TERMS Warranty for SAMI products is valid 12 months from the date of purchase. Material and manufacturing defects that occur during the warranty period are covered by the warranty. When a defect occurs, please contact authorized distributor whom you bought the... - Page 10 All warranty terms apply only to a new product purchased from a distributor authorized by AS SAMI. The warranty does not apply to a resold product. * This manual is a translation of original.
Need help?
Do you have a question about the ST-1000 PTO and is the answer not in the manual?
Questions and answers