Table of Contents
Advertisement
Panel Description
① Mode DIP Switch -- 4 pin (UP=0, DOWN=1). The HD-AUDIO-BREAKOUT can be
configured to perform various tasks using the mode DIP switches. Detailed settings please
see below:
A.
B.
② L/R Out -- Extract the audio from the HDMI input
③ HDMI Output -- Connect to HDMI sink device
www.factorelectronics.com
Under control by DIP switch, the position of DIP Switch-0 should be UP (0).
DIP Switch-3 -- Selectable to convert HDMI signal to output.
Position=0 (UP) -- Auto convert 6G (4:4:4) Format to 3G (4:2:0) when detect sink not
support 6G (4:4:4).
Position=1 (DOWN) -- Always convert 6G (4:4:4) format to 3G (4:2:0).
DIPSwitch-2 -- HDCP management.
Position=0 (UP) -- HDCP follow sink.
Position=1 (DOWN) -- HDCP follow source.
DIP Switch-1 -- Audio embedding and bypass.
Position=0 (UP) -- Audio bypass.
Position=1 (DOWN) -- Audio embedding (L/R input added to the HDMI Output).
Under control by serial USB mode, the position of DIP Switch-0 should be DOWN (1).
DIP Switch-1/2/3 -- reserved or not in use.
5
HD-AUDIO-BREAKOUT
User Manual
Factor Electronics
Advertisement
Table of Contents
