Rubberized housing
As downlight Recessed hook
IR remote control
Lantern Battery Replacement
1.
Twist the end cap and remove from unit.
2.
Remove old batteries and replace with three new
D size alkaline batteries according to polarity
markings.
3.
Twist the end cap back on.
Manual Operation
Remote Control Operation
(Within 8m distance)
Manual IR remote control LED
Battery Type
Bulb Type
Accessories
Size
Weight
Removable cap
Green ON/OFF indicator
IR Remote Controller
Brightness indicator
Operation Button
High mode
Medium mode
5mm Nichia LED
ON/OFF Button
Low mode
2 lighting modes
High > Medium > Low > Remote Control Operation > Off
(Press for 3 seconds for SOS-FLASHING)
(Press for longer than 3 seconds to turn OFF)
High > Medium > Low > Off
(Blue LED indicator lights up to show remote control operation in stand-
by status. Press the IR remote controller's operation button to cycle
through various brightness levels)
(Press for 3 seconds for SOS-FLASHING)
(Press for longer than 3 seconds to turn OFF)
On > SOS-Flashing > Off
(Press OFF it stays in any mode over 3 seconds)
Lantern: 3 x 1.5V D size alkaline batteries (Not included)
IR Remote Controller: 2 x 1.5V AAA size alkaline batteries (included)
Lantern: 3 x 1W Nichia White LEDs
IR Remote Controller: 1 x 5mm Nichia White LED
IR Remote controller
Hanging hook (Not for climbing)
95mm x 95mm x 185mm
Lantern: 432g
IR Remote Controller: 48g (with batteries)
LED bulb never
needs replacing!
2 x AAA
Alkaline
Batteries
Operation
Open
Button
Open
Remote Controller Battery Replacement
1.
Slide the battery cover from the IR remote
controller.
2.
Remove old batteries and replace with two new
AAA size alkaline batteries according to polarity
markings.
3.
Slide battery cover back into place.
Open
Green LED
Indicator
Amber LED
Brightness
Indicator
3 x D
Alkaline
Batteries