Advertisement
2.
SPECIFICATIONS & ASSEMBLY
SPECIFICATIONS:
Model
Output/input
RD1500.V2
1500W/230V/13A
RD2500.V2
2500W/230V/13A
3.
INSTRUCTIONS FOR USE
3.1.
Unwrap the mains lead and plug it into the power supply.
3.2.
Turn the thermostat control to the highest setting.
3.3.
Choose the required heat output by selecting the appropriate switch which will light up when pressed.
RD1500
3.4.
Low setting
500W
Medium setting
1000W
High setting
1500W
3.5.
Once the required room temperature has been achieved turn the thermostat down until the light
on the selected heat setting switch goes out. The heater will then keep the surrounding air at the
set temperature by switching on and off at intervals. You may set reset the thermostat at any time.
3.6.
To switch the unit off, turn the heat selecting switches off and unplug from the mains. Allow the
unit to cool before handling or storage.
3.7.
Safety cut-out. The heater is fitted with a thermostatic safety cut-out which will automatically turn
the heater off should it be placed in circumstances that cause overheating or malfunction. Should
this happen, switch the heater off and disconnect it from the mains. Allow the heater to cool
before handling. Do not use the heater again until the cause has been identified and remedied. If
necessary return the heater to your Sealey dealer for servicing.
3.8.
When used for the first time set the heater to maximum power for two hours. Ventilate the room
well to eliminate the “new” smell which may emanate from the heater.
4.
MAINTENANCE
FWARNING! Disconnect the heater from the mains power, before servicing or performing any maintenance, which must only be carried out
by an authorised service agent with the exception of the following.
4.1.
Dust the radiator (when cold) with a dry cloth.
4.2.
Do not use a strong abrasive to clean to clean the radiator.
4.3.
When storing the heater in the summer, use the original shipping box and store in a safe, dry location.
Note:
Report any oil leakage immediately to an authorised service agent.
5.
PARTS LIST
RD2500.01 . . .Thermostat for RD2500
RD.01 . . . . . . .Thermostat for RD1500
RD.03 . . . . . . .Rocker switch
RD.05 . . . . . . .Wheel Plate
RD.23 . . . . . . .Plastic Handle
RD.31 . . . . . . .Oil Seal Ring
OIL FILLED RADIATORS
Models RD1500.V2 & RD2500.V2
73/23/EEC Low Voltage Directive (S.I. 1994/3260)
89/336/EEC EMC Directive (S.I. 1992/2372 & Amendments)
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product. WARRANTY: Guarantee is 12 months from purchase date, proof
of which will be required for any claim. INFORMATION: Call us for a copy of our latest catalogue on 01284 757525 and leave your full name
and address including your postcode.
ASSEMBLY
Mount the castor wheels between the first and second element of each end of the
No of Elements
radiator.Tighten the wing nuts on the metal loops and your heater is ready to use.
7
11
RD2500
1000W
Select switch with one white bar printed on it.
1500W
Select switch with two white bars printed on it.
2500W
Select both switches
RD2500.02 . . . .Heating Element RD2500
RD.02 . . . . . . . .Heating Element RD1500
RD.04 . . . . . . . .Wheels (one set)
RD.07 . . . . . . . .Thermal Fuse
RD.26 . . . . . . . .Cord Windings
RD.38 . . . . . . . .Wheel
Declaration of Conformity
are in conformity with the following EEC standards and directives
The construction files for these products are held by the Manufacturer and may be inspected on request
by contacting Jack Sealey Ltd.
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
We, the sole importer into the UK, declare that the products listed here
27th June 2002
01284 757500
01284 703534
RD.42 . . .Wheel Support Screw
RD.47 . . .Tip Over Switch
www.sealey.co.uk
9A>
sales@sealey.co.uk
email
RD1500.V2 & RD2500.V2 - (2) - 300104
Advertisement
