Get Started; Charge The Battery - Nokia BH-505 User Manual

Bluetooth stereo headset
Table of Contents

Advertisement

Get started

The headset contains the following
parts shown on the title page:
indicator light (1), cover of the
charger connector (2), power key (3),
answer/end key (4), earplugs (5),
volume key (6), rewind/fast-forward
key (7), microphone (8), and play/
pause key (9).
Before using the headset, you must
charge the battery and pair the
headset with a compatible device.
Parts of the device are magnetic.
Metallic materials may be attracted to
the device. Do not place credit cards
or other magnetic storage media near
the device, because information
stored on them may be erased.

Charge the battery

Before charging the battery, carefully
read "Battery and charger
information".
Warning: Use only chargers
approved by Nokia for use
with this particular model.
The use of any other types
may invalidate any approval
or warranty, and may be
dangerous. Use of
unapproved chargers may
present a risk of fire,
explosion, or other hazard.
When you disconnect the
power cord of any accessory, grasp
and pull the plug, not the cord.
1. Connect the charger to a wall
outlet.
2. Lift the cover of the charger
connector from the edge, and
connect the charger cable to the
connector. The red indicator light is
displayed during charging.
Charging the battery fully may take
up to 2 hours.
ENGLISH

Advertisement

Table of Contents
loading

Table of Contents