Advertisement
Advertisement
Table of Contents
Summary of Contents for FTG infinity board
- Page 1 ASSEMBLY & INSTALLATION...
- Page 2 GENERAL ASSEMBLY & INSTALLATION Unpack the 2 metal hangers. Attach the 4 small carabiners hooks to the 4 holes on the back of the In nity board. Attach the 2 adjustable rope ratchets to the 2 metal hangers and hang the light. Adjust the rope ratchets to the appropriate height. Attach the power cord to the driver on the In nity board and screw the connection together to ensure a watertight seal.
- Page 3 2-PACK Unpack the 2 metal connecting bars (there will be 1 bar in each box). Connect the 2 lights by using 1 metal bar and 4 screws, repeat on the opposite side. Unpack 2 metal hangers. Attach the 4 small carabiner hooks to the 4 corner holes on the back of the In nity boards (2 holes on the left board and 2 holes on the right board).
- Page 4 4-PACK Follow Step 1 in the 2-pack instructions above to build 2x 2-packs. Use 2 additional connecting bars on the left and the right to connect all 4 In nity boards together. In total, you will use 6 connecting bars and 24 screws.
Need help?
Do you have a question about the infinity board and is the answer not in the manual?
Questions and answers