Millennium Marine D-100 Use Instructions

MILLENNIUM D-100 Deck Chair USE INSTRUCTIONS
1. The only assembly required is to remove the tripod base
assembly from the zippered bag located on the bottom of the
seat as seen in Figure (1)
2 . Insert the male portion of the tripod into the female portion
on the bottom of the seat as seen in Figure (1) making sure it is
inserted completely.
3 . Spread the tripod legs out completely as seen in Figure (1).
4 . The height of the seat can be adjusted by using the detent
buttons located on each leg. They can also be adjusted
independently for uneven terrain.
TO PACK THE CHAIR FOR TRANSPORT:
1 . Move each leg to its shortest configuration by using the
detent buttons.
2 . Fold the tripod support assembly.
3
.Remove the tripod support assembly from the chair by
pressing the detent button located on the male portion of the
tripod just under the bottom of the seat as seen in Figure (1).
4 . Place the tripod assembly back into zippered bag.
Millennium Outdooors●
201 Fairmont Plaza Pearl, MS 39208 P: 601-932-5832 F: 601-932-0068
www.millenniummarine.com