Advertisement
Quick Links
SKU KINFTN13CP (13' Inflatable Dome Tent with Custom Graphics)
SKU KINFTN13CP (13' Inflatable Dome Tent with Custom Graphics)
SKU INFTN13SWCP (Side Panel Accessory / Custom Graphic
SKU INFTN13SWCP (
Side Panel Accessory / Custom Graphic) )
SKU INFTN13CP (Replacement Canopy / Custom Graphic)
SKU INFTN13CP (
Replacement Canopy / Custom Graphic)
INFLATABLE DOME TENT
INFLATABLE DOME TENT
User Manual
User Manual
Scan the QR code to
visit the product page.
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Displays2go KINFTN13CP
- Page 1 SKU KINFTN13CP (13’ Inflatable Dome Tent with Custom Graphics) SKU KINFTN13CP (13’ Inflatable Dome Tent with Custom Graphics) SKU INFTN13SWCP ( SKU INFTN13SWCP (Side Panel Accessory / Custom Graphic Side Panel Accessory / Custom Graphic) ) SKU INFTN13CP ( SKU INFTN13CP (Replacement Canopy / Custom Graphic)
-
Page 2: Maintenance And Safety
• DO NOT open zipper once unit is inflated. • Open clip on leg when inflating. • Keep tent away from sharp objects. If you have any questions regarding our products, please visit us at www.displays2go.com or contact Displays2go customer service at 844-221-3388. -
Page 3: Packing List
Packing List Packing List C. C. E. E. B. B. G. G. F. F. H. H. PART QUANTITY A: Custom-Printed Canopy (Not pictured) ............1 B: Inflatable Tent ....................1 C: Air Pump and hardware ..................1 D: Carrying Case ....................1 E: Water Bladder (Weight for Tent) ..............4 F: Stakes .......................16 G: Rope .........................4 H: Repair Patch .....................3... - Page 4 ASSEMBLING TENT ASSEMBLING TENT 1. Spread out inflatable tent with valves facing down. Spread printed tent top over the inflatable tent with roof facing up, as shown above. 2. Attach the tent and topper via zipper. First, attach the 4 zipper fasteners at the center of the tents, then zipper down to the corner of each leg.
- Page 5 3. Individually inflate each tent leg via the inflation valves. Do not overfill. See page 7 for air pump instructions. 4. Support the tent while it inflates, making sure the legs are not twisted and are inflating evenly. Tightly close each inflation valve once finished. Note: We recommend one person supports the center of the tent as it inflates.
- Page 6 ANCHORING TENT ANCHORING TENT OUTDOOR USAGE Secure tent to ground using stakes (shown left). Tie ropes to each stake, then tie through both stake anchor rings on each leg. Repeat on all 4 legs. Note: Product intended for use in fair weather only. INDOOR USAGE Use water bladders to weigh down the legs of the tent and keep it secure.
- Page 7 AIR PUMP OPERATION AIR PUMP OPERATION WARNINGS: • NEVER attempt to disassemble or close openings while pump is in operation. • NEVER leave pump unattended while in use. • DO NOT allow sand, small rocks, or other debris to be sucked into the inflation or deflation port while operating. •...
- Page 8 DISASSEMBLY DISASSEMBLY 1. Unzip and remove the side walls. 2. Unscrew every valve to release air. The tent will slowly deflate. 3. Once deflated, turn tent inside out, so that seams lay upward. The tent and printed tent top can stay attached for disassembly and storage.
-
Page 9: Contact Information
6. Insert tent into carrying bag. Wall panels can be inserted into appropriate compartments. Store the tent in a dry place. Enjoy your new inflatable tent! Enjoy your new inflatable tent! CONTACT INFORMATION: www.displays2go.com PHONE: 844-221-3388...
Need help?
Do you have a question about the KINFTN13CP and is the answer not in the manual?
Questions and answers